New Laguna Owner

PincA90

PincA90

New Member
Oct 16, 2019
5
Sthockholm Sweden
Boat Info
Sea Ray Laguna 21” CC 1997
Engines
Mercury 200hp EFI 2001
6580FCF2-FCB7-4835-A864-5DAD9A730CFA.jpeg
Hi, i’m a new happy owner of a 1997 Sea Ray Laguna 21cc. We just took it up from the water and have a question regarding this, what is that? // Roger
 
Ok, it’s a small showel wheel inside. And the hole next to it? A hole under the boat feels strange.. :)
 
PincA90 said:
Ok, it’s a small showel wheel inside. And the hole next to it? A hole under the boat feels strange.. :)
Click to expand...
It a water pickup for something. There will be a seacock in the bilge and a hose that will go to something. Maybe a live well? Or a wash down pump?
 
Didn’t you have a pre purchase survey performed?

If not ...think about getting one before you do much off shore running.
 
El Capitan said:
Didn’t you have a pre purchase survey performed?

If not ...think about getting one before you do much off shore running.
Click to expand...
The boat was in the water when we bought it, it runs well and we have had no probs so far.... :)
 
The "hole" should be on both port and starboard as very heavy duty seacocks, but it appears the pickup has been replaced with a troubling thru hull. I just restored a 90 21' and pulled everything. Plus have schematics from SeaRay.

That would concern me at high speed, would replace and is an easy correction.
 
Displacement said:
The "hole" should be on both port and starboard as very heavy duty seacocks, but it appears the pickup has been replaced with a troubling thru hull. I just restored a 90 21' and pulled everything. Plus have schematics from SeaRay.

That would concern me at high speed, would replace and is an easy correction.
Click to expand...
Displacement said:
The "hole" should be on both port and starboard as very heavy duty seacocks, but it appears the pickup has been replaced with a troubling thru hull. I just restored a 90 21' and pulled everything. Plus have schematics from SeaRay.

That would concern me at high speed, would replace and is an easy correction.
Click to expand...
So if i understand you correctly it’s a weak thru hull that i have? And your suggestion is to replace it with a heavy duty (in brass?)before anything goes wrong is it possible to get a copy of the schematics from you?
 
I don't think you have a holding tank, do you? Otherwise I'd say that's your macerator pump discharge.
 
PincA90 said:
So if i understand you correctly it’s a weak thru hull that i have? And your suggestion is to replace it with a heavy duty (in brass?)before anything goes wrong is it possible to get a copy of the schematics from you?
Click to expand...
Yes, I think someone took the brass seacock and brass pickup off and replaced it with the transducer and then drilled a new hole and used a thru hull designed to be above waterline.

I can send schematics, there is a section on the water system. Can you PM (private message) me your contact info? I did not see how to PM on this site.
 
You must log in or register to reply here.

Forum statistics

Threads
113,154
Messages
1,427,356
Members
61,060
Latest member
Danileo
Back
Top