Official 350 Thread

Greetings from the North. Maintenance prices here have gone greedy crazy. A friend of mine just had the bottom of his 36-foot cruiser sandblasted with epoxy bottom and 2 coats of bottom kote. 17000.00 Can. \this pandemic has created a very greedy group in some areas of service.
\on another matter, any idea where to find the 3 tracks that guide the sliding top cover into the entry to the salon? Have a couple that is cracked. How are the engines running??
 
Greetings from the North. Maintenance prices here have gone greedy crazy. A friend of mine just had the bottom of his 36-foot cruiser sandblasted with epoxy bottom and 2 coats of bottom kote. 17000.00 Can. \this pandemic has created a very greedy group in some areas of service.
\on another matter, any idea where to find the 3 tracks that guide the sliding top cover into the entry to the salon? Have a couple that is cracked. How are the engines running??

Not sure about door tracks. They look to be on the hard to find list. Engines running great. Ran them at 4000RPM this weekend. I blew out a trim cylinder last weekend though.
Weather warming up?
 
Not sure about door tracks. They look to be on the hard to find list. Engines running great. Ran them at 4000RPM this weekend. I blew out a trim cylinder last weekend though.
Weather warming up?
Yes it is 32 C today, high 20s all week.
 
Greetings from the North. Maintenance prices here have gone greedy crazy. A friend of mine just had the bottom of his 36-foot cruiser sandblasted with epoxy bottom and 2 coats of bottom kote. 17000.00 Can. \this pandemic has created a very greedy group in some areas of service.
\on another matter, any idea where to find the 3 tracks that guide the sliding top cover into the entry to the salon? Have a couple that is cracked. How are the engines running??
You can still buy the tracks from FP marine I bought a set of black ones a year ago. They have a goofy website called sea ray parts..

https://www.boatoutfitters.com/sea-...Fl829HVG33orp7uHuTyROAY_oaAqeUEALw_wcB#93=170
 
Greetings from the North. Maintenance prices here have gone greedy crazy. A friend of mine just had the bottom of his 36-foot cruiser sandblasted with epoxy bottom and 2 coats of bottom kote. 17000.00 Can. \this pandemic has created a very greedy group in some areas of service.
\on another matter, any idea where to find the 3 tracks that guide the sliding top cover into the entry to the salon? Have a couple that is cracked. How are the engines running??
You can still buy the tracks from FP marine I bought a set of black ones a year ago. They have a goofy website called sea ray parts..

https://www.boatoutfitters.com/sea-...Fl829HVG33orp7uHuTyROAY_oaAqeUEALw_wcB#93=170
 
I would appreciate that very much. Tks
Yes, it was FP Marine, Rockledge Florida. (321) 639-2951
Product code: 350DAhatchtrack
They will know.

Hatch pile weatherstrip on underside. From: allaboutdoors.com
North Kansas City, Mo.
(816) 221-6543
Item# WTP187380-G
Pile weatherstrip .187 backing x .380 pile T-slot slide in type
Above for ‘90 350 sundancer
 
First week into summer like but warm rainy pattern. Hopefully it will dry out for the weekend. Next project on the list is replacement of the fuel tank sending units. I understand our tanks measure 19.5" deep. Planning to go with a 12-24" universal kit from West Marine
https://www.westmarine.com/buy/moel...sending-units--P006_180_003_536?pCode=9398488
For your info: I consider these the premium tank sending unit.
KUS USA, Inc.
Item: SSS/SSL Sending Unit
You probably want 19 inch.

we installed on son’s 90 350 and our ‘91 310. Rock solid and no more guessing. Good luck
 
For your info: I consider these the premium tank sending unit.
KUS USA, Inc.
Item: SSS/SSL Sending Unit
You probably want 19 inch.

we installed on son’s 90 350 and our ‘91 310. Rock solid and no more guessing. Good luck

Great. Thanks for this!!! Fixing old boat gauges is challenging.
 
I know there are several threads out there about V-Berth repairs but does anyone here know if there’s a way to lock the berth up or down w/o using the actuator? Bed will stay up but for a moment but keeps sliding up down while underway. Hope all are enjoying the season. This is for a 2008 350 / 2009 370 model
 
First time back to Club Sea Ray in quite a few years. Boating has changed considerably up here in Canada, as I am sure it has every where else in the world. Pulled HYDRO-Therapy out of the water yesterday, not expecting any major issues after all, last year I only found 2 zebra mussels on one trim tab. Here is what I found yesterday.
257A7CC4-1956-4608-B0C4-B77F1E734206.jpeg
 
I was unaware our boats offered out-drive option. Thanks for sharing.
 
I’m trying to replace the zinc on my hot water heater, but I don’t know how to get the old one out without being the size of a squirrel. Any suggestions?
 
Does anyone know how to remove our long horizontal side windows? I received the new replacement seals with felt liners to replace the dried out and cracked originals.

Just wondering if anyone had any ideas.

Sorry I found it in another thread. Does not look as easy as I was hoping..

Thanks
Ed
 
Last edited:
Does anyone know how to remove our long horizontal side windows? I received the new replacement seals with felt liners to replace the dried out and cracked originals.

Just wondering if anyone had any ideas.

Sorry I found it in another thread. Does not look as easy as I was hoping..

Thanks
Ed
Ed, what was the other thread?
 
Ed, what was the other thread?
Let me back track some and see if I can find them again, basically I typed in side window replacement in the search tab. I was hoping I could just swap out the gaskets But seems to do it totally correct you have to pull the whole thing.

Pop out the black screw cover and you well see some screws holding the frame to the hull, Pull those and slowly pry the frames away from the hull.

Ed
 

Forum statistics

Threads
112,945
Messages
1,422,754
Members
60,928
Latest member
rkaleda
Back
Top