liv2ryde100
Active Member
Not sure but heat exchangers are on my list for this winter. There’s a guy in lindenhurst, ny that builds all types of Marine coolers. Stand up guy and his work is excellent. Lenco marine coolers.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
IT'S OFFICIAL!
My wife and I are the proud new owners of a, new to us, 2005 340DA 8.1's Vdrives.
lots of minor project to do to make the boat ours but we are really excited to get her home to South Florida.
New name will be Kay-LinSea
First of many questions.
Can someone tell me how to tell if we have the upgraded sound system?
We do not have the big tv on the bulkhead but that is one of my first projects for sure.
Thanks,
RandyView attachment 109034View attachment 109035View attachment 109036View attachment 109037
Kevin has the surrounds that fill the gap for a variety of different radios. I just did a standard horizon 1400 with gps and I’m happy with it.I need to replace the Raymarine Ray215 on my 2005 SD. Any suggestions for a similarly-sized VHF radio that will fit in the opening?
This sounds like an electrical problem to me. Freezing the gauges and motor shut off sounds like u lost power to that motorHi Everyone,
Need advice & feedback
I was running the boat yesterday. I was out for a few hours a various RPM's. i was almost home and got the boat up to 3100-3200 RPM's. after about 5-10 mins at that RPM, the port engine shutdown. i mean completely off. gauges stuck at their last position.
i throttled down the stdb engine and started limping home. I tried a few things, but no response.
I then hit the emergency battery cutover and the port engine start switch and the gauges responded and when back to an off position.
I could still not start the engine.
After another 5 mins limping home, i realized that i was still in drive. i put the port engine in neutral and i was then able to get a response when i moved the starter switch to on. However, every time i turned on the port engine, i got a constant alarm.
after another 10 mins, i tried it again and the alarm had cleared so i tried restarting the engine. It started right up, but the temp was at 179. once the engine ran for about 1-2 mins the temp dropped back down quickly to 162 and i went home using both engines around 1500 RPM's
Impellers changed 4 months ago but the port engine water pressure is lower than the stbd engine at all RPM's Pressure at idle is at 1.8. i do not remember the exact RPM's ( i think around 2800), but the stbd engine water pressure was 15ish and the port was 10-11.
I need to pull the sea water pump housing to check but either i chewed through an impeller or the housing is scored badly.
My real question is... is it normal for the gauges to freeze like they did & i thought in guardian mode the engine would simply drop to idle? this engine turned off completely.
Has anyone experienced this ?
I swapped my main fridge out with an isotherm, very minor adjustments needs to get the new fridge in. U can swap the galley sink with something from the depot however the sink in the head pulls out for a shower so prob online boating specific for that oneWe are so happy with our new to us 340DA.
Brought it home to Boca Raton from Cape Canaveral this past weekend.
Cruised at 3300 rpm, 21kts and 29gph. Full of fuel and water.
The ride is better than expected.
I do have a laundry list of items to take care of so looking for some guidance here.
The cabin fridge is not cooling enough for my liking and is quite discolored inside.
SeaRay parts list shows part number 1691311 but has anyone swapped there's out for something better?
I'd like to do this in the next day or so. I appreciate any input.
I also want to replace the galley and head faucets so if you have done this upgrade, please advise on where you purchased your new faucets?
Can I just run to Home Depot and find a faucet there?
any and all input is appreciated.
Thanks,
Randy
went to replace the burnt out bulb in one of the reading/spot lights in the vbirth and the socket is damaged and wont' hold the pins on a new bulb. has anyone replaced these light fixtures? I've been searching all morning and can't find a matching replacement fixture...any I'd like them to match please let me know if you have a source to buy a new fixture please and thank you
I also want to replace the galley and head faucets so if you have done this upgrade, please advise on where you purchased your new faucets?
Can I just run to Home Depot and find a faucet there?
that's what I have been searching on all morning. 1831205 SPOTLIGHT, SWVL TASK BRSHD SS W/SW N/CONNHi Outobie,
I believe this is the searay part number, 1831205
I would try calling MarineMax parts dept to see if they still carry the part or if they have an equivalent
Hi Outobie,that's what I have been searching on all morning. 1831205 SPOTLIGHT, SWVL TASK BRSHD SS W/SW N/CONN