where can i find the reservoir & gaskets for trim pump

• Mar 22, 2023

• #1

Amberjack1

New Member

Jun 1, 2021

14

Boat Info

1987 Amberjack 270

Engines

twin 350's 5.7 Vortec

so the bracket on my outdrive tilt pump broke last season, and wore out the gaskets to the reservoir from movement. I want to order a new reservoir and keep the old as a spare. trying to find the oem # on the original pump to match up. so on the outside of the pump towards the back there is a # 827E. when i remove the reservoir and look in the pump there is a #380, then under that is 205621. are these the oem#'s? i try to post pics, but its ask me for url, and i dont have a url in my files to upload that i can see.. any way it is an alpha 1 gen 1 outdrive, and the reservoir has a single screw attaching it to the pump from underneath. any help is appreciated. thanks

 

• Mar 22, 2023

• #2

Nater Potater

Well-Known Member

Oct 19, 2020

2,640

Southwest Idaho

Boat Info

1992 300DA Sundancer

Engines

Twin Merc Alpha I Gen II I/O's with 5.7 V8's

Amberjack1 said:

i try to post pics, but its ask me for url, and i dont have a url in my files to upload that i can see..

Click to expand...

While I can't help with the reservoir, you should just be able to drag and drop your picture into the active edit area.

 

• Mar 23, 2023

• #3

Amberjack1

New Member

Jun 1, 2021

14

Boat Info

1987 Amberjack 270

Engines

twin 350's 5.7 Vortec

 

• Mar 23, 2023

• #4

Bill Curtis

Well-Known Member

Mar 24, 2022

1,007

North Eastern NC

Boat Info

'95 220 Overnighter
454 Mag. Bravo3 w/ 2.0:1 gears and 28 pitch props

Engines

454 Mag Bravo3. 2.0:1 ratio gears w/ 28 pitch props

Seen those tanks on ebay. Here is new one from
Nuwave Marine Supply for $39

https://www.ebay.com/itm/400412666395?epid=1711825409&hash=item5d3a746a1b:g:zB8AAMXQgPFRG776&amdata=enc:AQAHAAAA8DIrVPbyqWZfayYep+0Qc0mgJbhXdihOenx4qzESsxKpWBhzEhopMHG722/UwNDgHDSwWrseug+iqPecOmNhOY5mhu8QTyI5RUbEAIfDAAyKUfHTOJkBQZLlYDWFhgftBvjq/kSfS+JfE2lfncWYmREexA0Kac28lia9yLZGVx7ijqP80/4/u1ugc/J6IYcJpKpFawLqvVNQRd9K7kLu+DBwhiQNWlcphXqcbyGpk0OND2mCHfTKn3n+izfa/lej4HdepQgEvFgAXS+Y8akjFRGPcLP+6CXlbNUDYSRpiR14DmMTYBdXlp9E5hcyZif2zg==|tkp:Bk9SR7atgubhYQ

 

• Mar 23, 2023

• #5

Amberjack1

New Member

Jun 1, 2021

14

Boat Info

1987 Amberjack 270

Engines

twin 350's 5.7 Vortec

 

• Mar 23, 2023

• #6

Amberjack1

New Member

Jun 1, 2021

14

Boat Info

1987 Amberjack 270

Engines

twin 350's 5.7 Vortec

this is what i bought using those same numbers and even though they say its a replacement it does not fit. the opening is smaller than my original, they look exactly the same, but they are not

 

• Mar 24, 2023

• #7

Bill Curtis

Well-Known Member

Mar 24, 2022

1,007

North Eastern NC

Boat Info

'95 220 Overnighter
454 Mag. Bravo3 w/ 2.0:1 gears and 28 pitch props

Engines

454 Mag Bravo3. 2.0:1 ratio gears w/ 28 pitch props

Now I am curious....

Only difference I see is the support fins inside on the new one are smaller and slightly different in shape. But flange looks the same. Maybe mounting bolt hole in the center not the same, as it looks like it sits lower than original? Just spitballing here.

Looking at your year boat and the pics, it is an Odine pump, assy # 86580A25 Available for around $900. List about $1100
Plastic tank is part # 18525A1 (same as you say you bought) NLA.. at Mercruiserparts.com

There was also a Prestolite pump setup in those years, but entirely different than the one you have in the pics

 

• Mar 26, 2023

• #8

Amberjack1

New Member

Jun 1, 2021

14

Boat Info

1987 Amberjack 270

Engines

twin 350's 5.7 Vortec

they sent the wrong part