Official 240 Sundancer Thread

Hi again!
It’s now about 70 F in Sweden and I´m in a hurry to get my boat in the water. But I have to install the Wallas-heater on land first and I can´t find a way to remove the strb wall in the mid-cabin, I can´t find any screws. Is there anyone here who have done this and knows?
 
I have same model (2004)

You can find the screws a bit covered by upholstery... You can feel the difference when checking..

Top, approx 1-2 cm from top, 4 screws and my boat 3 screws bottom (2 left - 1 right)...

Not sure if still have all screws :)
 
In addition, I ordered the upgrade KISS set, and use the gasbottles... not always have access to shore power. I just remove the canister after 'every' usage...

Where will you install your Wallas? I was checking the same, but despite gas canister no issue for me, don;t want igniter in my 'engineroom' with petrol engine..

Greeting from sunny Netherlands
 
roberteb said:
I have same model (2004)

You can find the screws a bit covered by upholstery... You can feel the difference when checking..

Top, approx 1-2 cm from top, 4 screws and my boat 3 screws bottom (2 left - 1 right)...

Not sure if still have all screws :)
Click to expand...

Thanks, when You say left and right is it near the corners?
 
roberteb said:
In addition, I ordered the upgrade KISS set, and use the gasbottles... not always have access to shore power. I just remove the canister after 'every' usage...

Where will you install your Wallas? I was checking the same, but despite gas canister no issue for me, don;t want igniter in my 'engineroom' with petrol engine..

Greeting from sunny Netherlands
Click to expand...

Hi, my plan is to install the Wallas behind the box beside the driverseat. I will mount it on the wooden floor thats in there.

This is the stowe I will replace the Kiss with;
https://www.skeppamarin.se/dometic-origo-2000.html
 
Glenna said:
Thanks, when You say left and right is it near the corners?
Click to expand...

Yep, near deck... only on left side one more approx 30cm(?) higher...

Small magnet can help you to find all :)

.
 
roberteb said:
Yep, near deck... only on left side one more approx 30cm(?) higher...

Small magnet can help you to find all :)

.
Click to expand...

FINALLY!!!
After I cut in the upholstery and still couldn´t see any screws, I mounted a handle on the bottom of the wall and took a big pull - and the wall came loose. There was no screws, only pressed in tight.
Thank You for Your concern!
Maybe I´ll put my heater in there, plenty of room and (now) easy to remove the wall.
 
Thanks for sharing info... maybe my sidewall was opened before and later closed with screws...

Is like IKEA, when assembled, no clue how to take apart :)
 
Glenna said:
FINALLY!!!
After I cut in the upholstery and still couldn´t see any screws, I mounted a handle on the bottom of the wall and took a big pull - and the wall came loose. There was no screws, only pressed in tight.
Thank You for Your concern!
Maybe I´ll put my heater in there, plenty of room and (now) easy to remove the wall.
Click to expand...

You better hurry to get the boat in the water, because the Swedish summer is the best day of the year Can You please post som pics after installation? Installing a heater is at top of our wish list for our Sundancer to! To bad that I’m not that handy kind of guy to get it done.
 
roberteb said:
Thanks for sharing info... maybe my sidewall was opened before and later closed with screws...

Is like IKEA, when assembled, no clue how to take apart :)
Click to expand...

:D
 
Holgersson said:
You better hurry to get the boat in the water, because the Swedish summer is the best day of the year Can You please post som pics after installation? Installing a heater is at top of our wish list for our Sundancer to! To bad that I’m not that handy kind of guy to get it done.
Click to expand...

Shure, I’ll try to take some pictures on Thursday when I’m going to make the installation.
If You prepare Yourself vid manuals, the right tools and a lot of confidence I don’t think You have to be that handy - and there’s always someone to ask for help, like I do all the time.:)
 
ADF1E7A8-1A3C-4C33-BBE5-12AC3C3F64AA.jpeg
Holgersson said:
You better hurry to get the boat in the water, because the Swedish summer is the best day of the year Can You please post som pics after installation? Installing a heater is at top of our wish list for our Sundancer to! To bad that I’m not that handy kind of guy to get it done.
Click to expand...

Finally done, a bad back thousand degrees in the midberth.
 
Nice, can you post more pics?
 
1048C87D-4C1D-42B6-A7D5-CA67951F5070.jpeg

Supply back in cabin.
3563EA0B-822E-452A-8D01-C173284E48B3.jpeg

Supply by the stairs in v-berth.
EB171A0E-9DC1-4D0A-86AB-DED9D7C345A4.jpeg

Panel outside head.
218FE9A1-E0CE-45A8-9A39-003EAC87053B.jpeg

Supply in mid-berth and a hatch for fill.
19740DCA-9DD5-409D-8C50-A141052C4515.jpeg

Exhaust and air-inlet.
5285917A-339B-4C0B-A1A5-E2CDC9C9AB1C.jpeg

Supply near helm.

roberteb said:
Nice, can you post more pics?
Click to expand...
 
Does anyone know how to get a part list for this boat? I can’t find one that comes with boat.
Like for the screw covers on windshields.
8646D80F-34A5-4843-B239-E5C1B63B689C.jpeg
 
Thanks, but it is written; "The parts listed are only available through your local authorized Sea Ray dealer."

I could'nt find it for downloading.
 
You must log in or register to reply here.

Forum statistics

Threads
113,118
Messages
1,426,556
Members
61,035
Latest member
Lukerney
Back
Top