Recent content by bassadict69

Thank you! I will check all that out this next weekend while on the water...

No water in bilge. Only one bilge pump. A little research and it looks like the other unit in the bilge is the trim pump...Maybe I need to check the level in it? Does it have a sensor/alarm?

The reservoir at the front of my engine has been topped off and is ok. I also have another small reservoir of some sort in one of those rear side compartments...I don't even know what that is. I guess I need to figure that out.

Often times, when pulling someone on a tube and starting from a stop, the alarm will go off...I can back off the throttle, then throttle back up and it will stop. Any ideas what this is? I thought the oil level was low, topped it off, but it still does it.

Shreveport-Bossier area here...living on Cypress/Black Bayou in Benton

I began having problems again last year, and now, it isn't working at all..doesn't matter if the remote has a battery or not. The head still has power and shows the time, but will do nothing else. Time for a new radio!

Sorry...it was a break in the wiring somehow. He pulled out the bad wire and ran a new one.

I ran out of time! It was time to go back to work today and my wife needs the boat for July 4th for a lake party so I took it in to the shop.

I ran out of time! It was time to go back to work today and my wife needs the boat for July 4th for a lake party so I took it in to the shop.

You lost me on that one...

First thing I checked was the fuse...can't remember but it was a 7 or 7.5. I even put a new one in it's place even though the other was good.

Everything else seems to be working fine!

Measuring on + side (step 1) I read 11.6V...Neg side (step 2) I read 0.00v

I cut the connector off the fan and used jumpers from the boat harness to the bare wires of the fan...still nothing. I moved the negative jumper from the boat harness to the boat battery...still nothing. Measuring the ends of the two jumpers when coming from the boat harness, I measure...

I cut the connector off the fan and used jumpers from the boat harness to the bare wires of the fan...still nothing. I moved the negative jumper from the boat harness to the boat battery...still nothing. Measuring the ends of the two jumpers when coming from the boat harness, I measure...