Recent content by Capap

Nice work.

Your parts manual shows Plex, if it is plexiglass then it’s an acrylic material.

The Mercruiser steering angle sensor is wired to work with the smartcraft plug on my boat but it would not communicate using via the gateway to my Garmin 943xsv so I cut the plug off and wired it directly to the GRA10 to communicate via nmea 2000. This would be a great path for boats that are...

Money or muscle, either one works.

It’s a good point.

I used the Mercruiser steering angle sensor tied to the Garmin GRA 10 adapter.

Lofrans makes direct replacement parts that should bolt right up on your boat. https://www.imtra.com/learning-center/searchtag/searay

You may be missing more than just the bulb.

Glad it worked out.

https://comus-intl.com/product-category/proximity-sensors/magnetic-reed-proximity-switches/ This may help in your search.

That is a latching solenoid, to test it apply and remove voltage to the silver studs and you should hear it click. If it clicks then check for continuity on the copper studs to see if it is open or closed then apply and remove voltage to the silver studs again if it clicks again then check to...

O Overused that’s all.

That being said…