I had the same challenge on my 1996 400 EC. The guys are right, there are 4 screws at the top and 3 on the bottom. Then the door comes right out. Careful of three things; 1) Scratching the door itself when removing and installing, 2) Make sure you keep an eye on the top rollers and don't let...
Good morning,
Does anyone know if there is availability to purchase a new Honda engine for my Kohler 6.5 cz gas generator? The Spec is 125226. I know it is a Honda, but from ~1996 with 600 hours. Had many problems with it and am working to rebuild it. Parts however are few and far between...
I've confirmed the pump is not running as there is no noise, humming or vibration. I'm heading down tonight to see if there is power to the leads, I have it at the breaker on the panel so if not at pump, I've narrowed the search. If at the pump I've also narrowed the search at about a $300...
Thanks for the help, didn't get to the boat last night with the weather interfering. I will get out there tonight and try to prime with your suggestions....stand by...
Thanks for the info...I have 110v at the breaker but haven't checked the pump....my thought is the same that it may have lost prime, I will check that tonight...I also checked the strainer and it's clean.