Had to replace my intake manifold due to a rusted hole in the exhaust crossover. I believe this is a common issue. Put it all back together and it fired right up. The issue is that the Rpm’s are surging at idle. 650-1400 then somewhere in between. Rev engine and it would have a very noticeable...
After going to the mercury website I have found the correct ignition coil and etc... I should have thought of that sooner. Just curious why you say the mefi3 doesn’t have a soft alarm
I guess my real issue is what else is different. I was looking to get a spare ignition coil but it doesn’t match either. I have a soft alarm at 3000 rpm and a no start condition when hot. If I need to buy the parts that I believe I need, what part numbers do I use, what engine do I look up to...
The site clearly shows that the sea water pump is belt driven. Does not state that it is for bravo drives only. Alpha drives have had it both ways. Someone please clarify this if you can. Thanks for your help.
hi everyone, I have. 1999 280BR that has twin 5.7 TBI motors. Serial number on the starboard motor is 0L349745 which comes up as a Gen+ and port motor is very close in sequence just don’t have it with me at the moment. My problem is mercruiserparts.com says this motor has a belt driven raw water...
Thanks, there is one on eBay about 45 min down the road from me. $2600 but I haven’t checked with him about age or whether it’s wired for the panel inside the cabin. Would be nice if they would make these portables safe for enclosures. Thanks and yes I thinks it a Mitsubishi engine. Really would...