Recent content by John Aikenhead

  1. John Aikenhead

    Official 370 Sundancer thread

    Don't think you would have any problem using a professional boat hauling Co. On mine they used the low loader bogey type of trailer that slides under/around the boat and gives full support allround. Forgot to mention that they insisted on removing all topside canvas which makes sense. See...
  2. John Aikenhead

    Official 370 Sundancer thread

    Yes that's the ice maker below the mirror, works fine but doesn't get used much, I'm thinking of removing it and fitting another small fridge there instead if I can find one to fit. John.
  3. John Aikenhead

    Official 370 Sundancer thread

    Hi Roch; Microwave looks good, I bought a new one also, looked good/modern when I fitted it. I had intended to change out both the microwave and outdated 1980's coffee maker but it made the coffeemaker look even more outdated, can't find a modern looking coffee maker that fits snugly into the...
  4. John Aikenhead

    Official 370 Sundancer thread

    Thanks Roch; Will check it out. John.
  5. John Aikenhead

    Official 370 Sundancer thread

    Hi Roch; Panel looks good. Steering wheel also looks good, assume its a Searay upgrade. Can you give any details where you got it from/price etc. Would like to change original standard issue wheel on my 370. John; Beamsville Ontario.
  6. John Aikenhead

    Official 370 Sundancer thread

    Thanks comments, yes I do get occasional teardrop on rudder stock packings but not enough to cause water in bilge. I will check Generator shaft seal and hoses as per your comment. Don't blv there is any leakage from cockpit drains but will check it out. Interested to know if anyone experiences...
  7. John Aikenhead

    Official 370 Sundancer thread

    Have a similar sit'n on my 95 370 Sundancer, I thought it was caused by slight leak which I had on my Port Engine drive shaft seal (Tides Marine Dripless) but I changed the seal last week which stopped that leak. Now I'm seeing an occasional small build up of water iwo Stb'd bilge keelson area...
  8. John Aikenhead

    410 Sundancer/Express Cruiser and 400 Sundancer/Express Cruiser **Official Thread**

    Hi Searay Chuck; I spoke to the boatyard just now; They say that the 98-370 boat in question is impounded at the yard by "BoatUS" No one is allowed near it or on it, I guess its due to Insurance matters or possibly USCG is also conducting an investigation who knows. Apparently she hit the...
  9. John Aikenhead

    Official 370 Sundancer thread

    Hi Chada & Howard I spoke to the boatyard just now; They say that the 98-370 boat in question is impounded at the yard by "BoatUS" No one is allowed near it or on it, I guess its due to Insurance matters or possibly USCG is also conducting an investigation who knows. Apparently she hit the...
  10. John Aikenhead

    Official 370 Sundancer thread

    Will let you know sit"n once Iv'e been able to talk to the boatyard. John.
  11. John Aikenhead

    1995 Searay Sundancer 370 - Engine Comp't Vent Fairing Cover

    Thanks, I checked my boat - yes that's the one, dim's match Seadog item No 331400. See attch'd photo. Cheers; John.
  12. John Aikenhead

    Location; Beamsville Ontario Canada

    Location; Beamsville Ontario Canada
  13. John Aikenhead

    1995 Searay Sundancer 370 - Engine Comp't Vent Fairing Cover

    Hi again; Many thanks for your info. Waiting to hear back from this boatyard in Lackawanna N.Y. ref the 98 370 being salvaged out. I think I can find those grills locally if I decide to go that route but probably 2 times the cost here in Canada, there's no big rush so could wait until they open...
  14. John Aikenhead

    Official 370 Sundancer thread

    Ref my 1995 Searay Sundancer 370 I'm looking for a "Portside" Aft vent fairing cover, mine went missing somehow. This is the streamlined fairing cover for the engine comp't natural vent, it is made of plastic and secured with (4) small screws. Have tried many of the online sites incl' Salvage...
Back
Top