Recent content by Ky Tundra

Old post, but what did you do for a rebuild? Mine works but is very slow. Thanks

Last boat had a Purasan treatment, I'm on my first boat with a holding tank. I saw a couple of mentions early in this thread about using OxiClean? A year later, has anyone successfully used Oxi instead of NoFlex? I looked at the Noflex "recipe" but OxiClean off the shelf seems cheap and...

Yes, I checked out the sump. Appeared to be in good shape. And this boat is winterized and sump is filled w antifreeze. This was straight water. But thanks.

Looked at an 89 390 today. Boat was in great shape but had about 1/2 water sitting in the large center hatch in the floor of the galley. All other hatches were dry. Anchor locker showed a little moisture but no standing water. Hatch under front bed was basically dry, felt slightly damp, but...

Thanks for the input. Checked out another aft cabin boat tonight and for now have decided to stay focused on the express models. Wife changed her mind and said a curtain will be fine for the second cabin but we still want a door for the main cabin. The search continues...

Thanks for the tips. I’ll check them out. I looked at the 370 and 380s last night. Neither look to have an actual door for the mid/aft “cabin”. Anyone know what model you need to look for to find proper doors for both cabins? Single head is fine but would like the privacy for the cabins.

We currently have an 89 340DA. 1 daughter (usually with a friend), 1 wife, 2 dogs. Usually at least one one other family with a kid or 2. We usually only spend one night out at a time because things get a little tight but would like to be comfortable for the entire weekend or longer. Don’t...

About 596. I have seen a few pop up in Knoxville. Was surprised to find that’s almost 1000 miles by water. 250 miles on the road. Heard it’s a beautiful trip though.

Thanks!

Shipping to KY. Depends on where I can find a boat. We are on the Ohio so May be able to get it here by water but have to compare costs.

Did anyone look at shipping a 440 and how much disassembly is required? I’m in Kentucky and can’t find one in the area.

A little late for me to reply, but thanks for the input. Finally getting around to ordering.

Does anyone have a source for a replacement sensor? Thanks!

This attachment shows the setup I was referring to from the Parts Manual. Looks like the dipstick (#26) is tied into a tube that goes into the drain plug. Am I reading this right? Definitely not the setup I have. I'll post some pictures of mine when I get back down to the boat. The...

Do you have/familiar with that generator in the 340? I only ask because the attached pic shows it on the right side of the motor. Same location as mine but that’s pushed up against the hull of the boat. That’s why it was rerouted. There would be know wats to get to a short stick like in the...