Thank you Bfernald for posting the bulletins. Very helpful info!
Stee6043: Like that dingy off the back of yours. My engines are not the Horizons, but the lower 330HP version. Here's a pic
Hello Everyone - Im experiencing some water pooling in both engines in the exhaust manifold on my 2000 340 Sundancer w/ 7.4 MPI engines. This was a project boat that I bought last year with rebuilt engines, however the boat was inoperable and none of the "fixes" were on it at time of purchase. I...
Hi Everyone - I was curious to know what my 2000 340 weighed with 7.4mpi's and V drive configuration, 4 batteries and 3 cylinder 5.0KW Westerbeke gen set. I took the boat to a certified scale and weighed it - it came in at 17980 lbs on the trailer. I had weighed the trailer previously at 2320...
Hello Everyone: My wife and I are restoring a 2000 340 Sundancer. It originally came with an icemaker built in the cockpit area which was gone when purchased and we are trying to decide whether it makes sense to replace it or put a 2nd fridge there. We live in Tampa FL so the climate is hot...
My wife and I bought a 2000 340 Sundancer that the previous owner started redoing the upholstry in the cabin but did not finish.
We need help figuring out what Searay used to hold in place the perimeter cushions in the 2nd stateroom? There is a 1"x1" board in this picture that is screwed to the...
Thanks to everyone who responded! Appreciate all the knowledge in this forum. I did have the water connected while running it. I'll try running it after pulling the shaft out to see if the rattle is still there.
I bought a 2000 Searay 340 as a fixer upper and its sitting on stands. The port side drive shaft wobbles and makes a rattling noise when I put it in forward gear or reverse gear. No noise in neutral. I've aligned the shaft but the result was the same. Im gonna include a video and hope someone...
OK Thank you both for the response. Then the 1000 watt motor sounds like the way to go. The old motor casing is very badly damaged from salt corrosion.
Hi Everyone - Looking to replace the locked up windlass motor in my 340 Sundancer. It is a Progress 1 unit and the parts schematic shows both a 700 watt or a 1000 watt motor to chose from. Can someone give me some good working experience as to which one to chose? There is a significant price...
Thank you everyone for the input, pics and comments. Your boats looked really good and are greatly appreciated! Now wife and I choosing colors is the next hurdle.
Looking for someone's experience for this type of material. Im thinking of installing it with glue in the cabin of my 340 Sundancer - How did it hold up, was it easy to clean etc, etc, Anybody?