Ok I have an update to the problem. They found fuel filters near the tanks, replaced them, also cleaned the carb and replaced the filter there! Bingo runs like a charm….. blast along at 4,000 rpm!
Thank you for all your inputs, yes I took the other fittings apart to check. I didn’t find a steel washer in the assembly, so my be I will head to Home Depot this week and look at replacing the fittings.
Cheers Rob
Hi yes I get really hot water, I just reassembled the fittings. Tomorrow I will check the pressure relief valve. When I open the tap for the hot water there is a build up of air pressure before the water flows, only when I’ve had the heater on.
Hi Guys,
I switched the water heater on and after 20 minutes the plastic hose came off a compression fitting under the steps next to the pump. I took it all apart cleaned and reassembled and it held the water pressure. So a day later I switch the heater on again, the water starts to heat up but...
Hi guys,
I am in desperate need of a replacement Thunderbolt IV breaker less electronic timing ignition. Mercruiser v8 7.4 454, 1986 engines.
I had a tune up and my mechanic is having a hard time sourcing the part.
Boat runs great except getting on a plane the port engine starts to miss. Summer...