340 SUNDANCER THREAD

Mittens said:
Finally addressed a factory annoyance..

You can’t turn on the light in the head with out turning on all the other lights around the cabin..... so if one needs to use the bathroom at night lights come on everywhere or your in the dark...

So randomly found the access panel behind the mirror in the head...this gave me an idea.. and I capitalized.

Ran a single wire from the head light, over top of head and down the wall behind the power panel, and into the switch panel on left side of counter.

The head light is now powered off the fan switch power supply side. Both fan switches work as normal. And the head light works alone by switch inside head..

So the breaker for the fan... poop/gally if off the head light is not powered/ can’t be left on. But in general when I first get to the boat I turn on the fan switch and some others.. but no more bathroom light = wake everyone
Click to expand...

This sounds like the right way to do it. When I had my 340 I went the "three minute project" route and mounted a "push light" on the wall next to the head. It looked OEM when it was on the wall! Super cheap...super easy.

https://www.amazon.com/GE-Operated-...s=push+light&qid=1554643601&s=gateway&sr=8-21
 
thanks for that....i have been wondering about the exact same thing....how does the mirror come off the wall?...

cliff
 
The top edge is a hinge.. the bottom is just the hard peg/Velcro. Single dot in middle... so support and pull from bottom middle.. it pops loos and you can raise it flat with the ceiling of the head. Stand under it with your head holding it up, and can remove the access panel behind it.
 
Mittens said:
The top edge is a hinge.. the bottom is just the hard peg/Velcro. Single dot in middle... so support and pull from bottom middle.. it pops loos and you can raise it flat with the ceiling of the head. Stand under it with your head holding it up, and can remove the access panel behind it.
Click to expand...

thanks....
 
How much you guys paying for haul out and bottom paint?
 
Mittens said:
How much you guys paying for haul out and bottom paint?
Click to expand...

This will be wickedly regional. I paid $650 for a recoat on my 340 two years ago (light sand, just the loose stuff). Haul-out would have been a couple hundred more but I was already out for winter.
 
Well got a “ruff cut” of the new tabs.

They are made out of 1/8th inch 304 stainless, 24wx14d with 2.5 inch drop fins on both sides, and a 1 inch up ridge on back for strength. Will square up the bends and clean them all and grind corners and edges smooth. Then weld them on old tabs while boat is out for bottom paint.
 

Attachments

  • 6865D788-8383-40B9-AA48-F799D7522DE6.jpeg
    6865D788-8383-40B9-AA48-F799D7522DE6.jpeg
    120.4 KB · Views: 222
  • BE52C9AB-CC68-47E3-AE51-1776DFA52CDA.jpeg
    BE52C9AB-CC68-47E3-AE51-1776DFA52CDA.jpeg
    143.8 KB · Views: 202
Mittens said:
Well got a “ruff cut” of the new tabs.

They are made out of 1/8th inch 304 stainless, 24wx14d with 2.5 inch drop fins on both sides, and a 1 inch up ridge on back for strength. Will square up the bends and clean them all and grind corners and edges smooth. Then weld them on old tabs while boat is out for bottom paint.
Click to expand...

looks good....keep us posted on their ability to enhance performance....

cliff
 
Hi All,
Sorry to interrupt,
I have a 2005 340 Sundancer. Looking for rear sunpad filler cushion. Does anyone have one for sale or know where I can find one? Cant seem to find it anywhere!
 
Finished. Ready for when boat is pulled.
 

Attachments

  • C80778D6-C54B-4466-87B7-E51035EC7776.jpeg
    C80778D6-C54B-4466-87B7-E51035EC7776.jpeg
    170.4 KB · Views: 227
  • 5275F53F-0F0F-4267-9D18-9542BA56409B.jpeg
    5275F53F-0F0F-4267-9D18-9542BA56409B.jpeg
    179.8 KB · Views: 203
  • 1FF54691-D4CC-434E-919D-658FCEFDBFE9.jpeg
    1FF54691-D4CC-434E-919D-658FCEFDBFE9.jpeg
    161.2 KB · Views: 215
  • 04CD3777-2E44-438A-9C28-8ACE767CE72B.jpeg
    04CD3777-2E44-438A-9C28-8ACE767CE72B.jpeg
    186 KB · Views: 254
Chris Crownover said:
Hello all just bought a 2008 340!

Anyone live in the Seattle area? Would love to take a cruise and learn a bit.

Chris
3218902640
Click to expand...

I changed out a battery and now I can’t get my stereo to work, need some help troubleshooting. Clarion sound system lights up and is operational just no sound from speakers or sub?
 
Chris Crownover said:
I changed out a battery and now I can’t get my stereo to work, need some help troubleshooting. Clarion sound system lights up and is operational just no sound from speakers or sub?
Click to expand...
I had the (I believe 90 AMP) fuse for my AMP go, which is connected directly to my forward battery. This made my AMP stop, and no sound came out of my speakers. Perhaps you may have the same problem?
 
Chris Crownover said:
I changed out a battery and now I can’t get my stereo to work, need some help troubleshooting. Clarion sound system lights up and is operational just no sound from speakers or sub?
Click to expand...

Welcome to CSR Chris....good luck with the 'new' boat....

you may not be aware that there was significant changes to the 340 model starting in mid 2003.....this forum is primarily for the earlier model 340's....the forum that is specifically for your model is http://clubsearay.com/index.php?thr...0-sundancer-thread.59501/page-88#post-1052197

you are always welcome to post on any forum you wish but you may get more specific replies on specific issues on the other forum...

good luck...
cliff
 
i need help can somebody have the part numbers for centeck water lift mufflers for 7.4 got to replace two heads might as well do it now thanks al
 
You must log in or register to reply here.

Forum statistics

Threads
113,118
Messages
1,426,467
Members
61,034
Latest member
Lukerney
Back
Top