boatrboy
Well-Known Member
I am installing a brand new transom assembly. The new part number requires replacement with the Magnum unit which I assume is the latest and greatest. This new design has a water tube which has a plastic insert. This insert is surrounded by a rubber sleeve and both stick out of the transom assembly. It comes with a new blue water outlet and gasket but my question for those of you who have installed this type;
When I place the gasket over the tube and place the outlet over the hose, it appears to have a gap of .125" or more. Is this supposed to collapse the rubber hose inside the outlet?
I will try to post pictures but those who have done this may be able to answer without them. I looked for installation instructions everywhere but nothing really talks about the outlet assembly procedure.
Thanks
Pics below
When I place the gasket over the tube and place the outlet over the hose, it appears to have a gap of .125" or more. Is this supposed to collapse the rubber hose inside the outlet?
I will try to post pictures but those who have done this may be able to answer without them. I looked for installation instructions everywhere but nothing really talks about the outlet assembly procedure.
Thanks
Pics below
Last edited: