GHS Swim Platform Lifts Announcement

G

GHS_lifts

New Member
Sep 15, 2011
3
Clearwater, FL
Boat Info
All Models
Engines
Any
GHS Swim Platform Lifts is excited to announce FACTORY DIRECT PRICING. For those of you who do not know, GHS is the OEM hydraulic swim platform lift manufacturer for Sea Ray, Meridian, Marquis, Carver, Cruisers, Chaparral, Four Winns, Regal, and Lazzara. We have sold our products for the past 10 years in the retail market under Florida Bow Thrusters, which has marketed our products as “Poseidon Lifts”. We are NO LONGER ASSOSIATED with Florida Bow. GHS will be offering all of our parts and products direct from our factory. With this change, we are able to deliver our products to dealers and customers at a lower price. Our base price for a complete lift system installed is $23,200.00. This includes: Lift mechanism, pump, hydraulic hoses, hardware, chocks, chock rails, complete fiberglass swim platform, hardwired handheld, remote transmitters, ratchet straps and complete installation. If the dealer would like to take care of the installation, our system will start at $19,200. With over 3,500 units in the field, we are the most proven and reliable lift system available on the market today, with unprecedented customer service. To find out more information please visit our website at www.ghslift.com.
*Prices will vary depending on boat model
*Prices are FOB: Clearwater, FL
For sales inquiries contact Kyle Cureton
kylecureton@southcoast-marine.com
PH. 1-855-791-0128
 
Last edited:
I will also note that I will be on Club Sea Ray regularly helping with any troubleshooting issues you may have as well as product/sales questions. Thank you. -Kyle
 
Last edited:
GHS_lifts said:
I will also note that I will be on Club Sea Ray regularly helping with any troubleshooting issues you may have as well as product/sales questions. Thank you. -Kyle
Click to expand...
Kyle, I'm having intermittent issues with my GHS lift on my 48 Sundancer. At times it won't go down and it works intermittently. On the down valve, I replaced both the Hydraforce coil and cartridge and this did not resolve the issue. Just yesterday, i was able to put the lift down and then it got stuck in the down position. I went into the bilge and set the "up" poppet valve into manual and I manually pumped the lift up about half-way. I then reset the poppet valve into normal and tried the lift again and it started working and came up the rest of the way. At this point I have no idea what it can be. I would be more than glad to pay someone pretty much whatever they want to fix this. This is very annoying and I don't trust the lift and I hesitate to use it, which is more annoying as I just bought a new Seadoo. Do you have any idea what might be wrong? Do you know of any service people in the Northern California area? I'm in Sacramento which is about 100 miles West of San Francisco. Any assistance you can provide is greatly appreciated. Thanks!
 
jeffrey vargas said:
Kyle, I'm having intermittent issues with my GHS lift on my 48 Sundancer. At times it won't go down and it works intermittently. On the down valve, I replaced both the Hydraforce coil and cartridge and this did not resolve the issue. Just yesterday, i was able to put the lift down and then it got stuck in the down position. I went into the bilge and set the "up" poppet valve into manual and I manually pumped the lift up about half-way. I then reset the poppet valve into normal and tried the lift again and it started working and came up the rest of the way. At this point I have no idea what it can be. I would be more than glad to pay someone pretty much whatever they want to fix this. This is very annoying and I don't trust the lift and I hesitate to use it, which is more annoying as I just bought a new Seadoo. Do you have any idea what might be wrong? Do you know of any service people in the Northern California area? I'm in Sacramento which is about 100 miles West of San Francisco. Any assistance you can provide is greatly appreciated. Thanks!
Click to expand...
Jeff,
Not sure if you noticed but this post is 8 years old & the PO hasn't been on CSR in about 7 years. I wouldn't hold your breath for an answer.
Screenshot_20190623-233407_Chrome.jpg
 
Jeffrey please share what the cause/ fix is for your swim platform is? I hope it’s an easy fix.
 
GHS_lifts said:
I will also note that I will be on Club Sea Ray regularly helping with any troubleshooting issues you may have as well as product/sales questions. Thank you. -Kyle
Click to expand...

Kyle,

I have a GHS lift on my boat, has worked great.

More importantly a couple of times when I have experienced an issue I was able to call the GHS office and get responsive, excellent advice and guidance.

Thank you for participating in this forum.

Welcome aboard,

Mark
 
You must log in or register to reply here.

Forum statistics

Threads
113,143
Messages
1,427,179
Members
61,056
Latest member
Rafael Saraiva
Back
Top