New carpet pics in a 1996 450DA!

The engine hatch piece on a 450DA is held in place by the rear seat supports. You may not have anything similar on the 340DA. On my boat, the engine hatch carpet can possibly slide about 3/4", but in 2 months, mine has not budged. The vinyl backing Corinthian uses is sort of tacky to the touch. It takes some effort to slide the carpet..........which make it a good bit harder to re-position after you remove and replace it after storage.
 
That looks really nice, Frank. I especially like the serged edge. It just gives it that little extra bit of distinction.
 
Do you have a pattern for a 1999 Sundancer 370DA???

I don't have a template for the 370DA, but we could certainly make an AquaMat for your 370 if you sent us a template! Feel free to give me a call or e-mail for some FREE samples. Thanks!
 
The fact that Frank did this is good enough for most of us. We all research what we are good at, and then report back to the rest.
I suspect you'll see a rash of 370DAs coming up, and I'll likely be in the lead.
PM me with details on creating a template for you.
 
PM'd ya!:smt001
 
hmmm.. the pile is denser/thicker on the aquamat backing one?

I opted for the original backing because I was told that pile was thicker. I don't have quite the sun and water issues that most of you do so and I wanted the thicker feel.
 
hmmm.. the pile is denser/thicker on the aquamat backing one?

Yes, the pile on the Aquamat backed carpet is 30 ounces for the Standard Berber and 36 ounces for the Premium Berber. The black rubber backed carpet that Sea Ray uses is 28 ounces.
 
New custom patterns sent off today to Corinthian. The older Berber should have been replaced sooner but better late then never... Replacing with woven vinyl with the same aqua loc backing (gray ribbed upgraded backing).
IMG_20200802_155742016.jpg
IMG_20200802_155747519.jpg
IMG_20200802_155753993.jpg
IMG_20200726_120556465.jpg
IMG_20200726_120543569.jpg
IMG_20200726_120536287.jpg
 

Forum statistics

Threads
113,157
Messages
1,427,415
Members
61,063
Latest member
Donny1983
Back
Top