Hardwood Floor Installation Questions

searaycruisn

New Member
Nov 10, 2006
242
Old Saybrook, CT
Boat Info
2000 380 Sundancer
Engines
CAT 3126
I would like to remove the carpeting in the salon of my 2000 Sundancer and install a hardwood floor. So far, I have not been able to determine what the best solution is, and what the issues are. I am leaning towards an engineered 3/8" floor with a veneer finish.

What type of floor (what brand) are boat builders using in new boats (other than teak / holly floors)? Are the floors glued or stapled? What type of glue should be used? How much of a border space would be required for expansion if I use an engineered floor and glue it down?
 
I would think some residential floor options would struggle with the temperature swings, wear and potential moisture in a marine environment. I would worry about delamination.

I assume teak is more costly than you are interested in. You might want to look at bamboo as it is very durable. Check with the manufacturer on temperature and humidity requirements.
 
i would like to remove the carpeting in the salon of my 2000 sundancer and install a hardwood floor. So far, i have not been able to determine what the best solution is, and what the issues are. I am leaning towards an engineered 3/8" floor with a veneer finish.

What type of floor (what brand) are boat builders using in new boats (other than teak / holly floors)? Are the floors glued or stapled? What type of glue should be used? How much of a border space would be required for expansion if i use an engineered floor and glue it down?


nu-teak.....
 
Eric, I am in the process of installing wood floors on my 380 as we speak. It took me a while to do my homework so here is what I came up with. I have always tried to stick with the same vendors that Sea Ray uses because of their extensive testing on components that go into their boats. That being said, they have been pleased with Mirage engineered hardwood flooring on the sport yachts and yachts. The stuff is not cheap, I found it from 6.99 - 7.99 sq ft. You need about 140 sq ft to do the entire boat.

I used the Sierra Maple on my boat which is what they are using on the newer boats with contasting cherry interior. It really looks rich! Once again, Sea Ray has designers that really know how to coordinate colors and textures so I just copy them. So far, the aft cabin was done and I am amazed how it looks. I will post pics tomorrow.

Also, since you are in CT, I have a master mega yacht carpenter that is looking for work if you are interested in getting it done professionally. The guy came down a few times, made templates, and really putting a custom touch to the install. Looks like the boat came from factory with the floor. He is even going to built me new teak steps to replace those vinyl covered ones going into the cabin.

Let me know if I could be of assistance.
 
Jim,

im thinking of using the same product on my 390, you glued it down, right?
how did you handle any in floor removable storage panels?

thx.......
 
Yes, he suggests glueing floor down. He wants to frame the hatches in wood and we plan on installing hinges and shocks like on the transome locker. I really would like to utilize the storage unlike before with the carpet runners covering the hatches. What a pain in the ass to use that space. I need to find some nice recessed hatch pull handles next.
 
Tried to upload photos but not having any luck.
 
Tried, if anyone wants to see photo PM me.
 
Last edited:
Guys, I tried creating an album on my profile. Please let me know if you see the photos. thanks
 
Looks really good! I'm looking at changing mine over to wood as well - thinking about bamboo for something a little different.
 
I am currently in the process of installing teak flooring in my master cabin, salon and aft cabin and will post some pictures when complete. Unfortunately, it has been too cold for proper use of the adhesive, so progress has been very slow.

Product selected: http://www.uafloors.com/AsianTeak.htm
 
I researched this subject before I "re-floored" my 2002 380. Due to the effects of moisture, humidity and the inevitable spills I opted to use a vinyl "textured planking" called traffic master. It has been down for a year now and we are very satisfied. Easily shaped/cut with razor knife. Very cost effective install.
 

Attachments

  • 100_2757.jpg
    100_2757.jpg
    109.8 KB · Views: 1,883
  • 100_2755.jpg
    100_2755.jpg
    109.6 KB · Views: 2,015
  • 100_2758.jpg
    100_2758.jpg
    106.1 KB · Views: 1,645
I researched this subject before I "re-floored" my 2002 380. Due to the effects of moisture, humidity and the inevitable spills I opted to use a vinyl "textured planking" called traffic master. It has been down for a year now and we are very satisfied. Easily shaped/cut with razor knife. Very cost effective install.


LOOKS VERY NICE AND NEATLY DONE.....:thumbsup:
 
Bildoug,

How did you handle the radius on the step down to the rear couch, did you use the same vinyle on the verical portion of the step?

How was the caerpet removal was there a need to level the underlaymant?

Thanks

SW
 

Forum statistics

Threads
112,942
Messages
1,422,697
Members
60,926
Latest member
dander88
Back
Top