Official (1990-1993) 270/290 DA thread

Got my gel coat now how about where to get pinstriping?I already did my sundancer now need to do my Pachanga 22.bought green boot stripe twice and can't get dark enough green also want 3/8 pinstriping that's all over boat with 3 colors
 
Can someone tell me how to remove the Starboard interior panel from the mid berth? I have some moisture there and can't figure out how the panel is attached. I also have a water problem from the head sink to the bilge area. I think the hose is broke, just not sure how I can access it to inspect it.
Thanks!
 
The head sink had a drip from the cold supply and a leak on the drain. The drains just go out through the hull. Easy fix. Broke the adapter to the faucet when I tightened it. Bought a new facet today. Hopefully the local hardware store has the adapter I need.
 
Hey guys, been following this thread for a few years and finally figured I'd join and tell u how helpful it has been over the last few years. My wife and I have done quite a bit of work and upgrades to our boat and a few of the ideas came from here.
Maybe u guys could offer some prop advice. Wondering what those of u with the 7.4bravo 1 are running for a prop. I've tried a few over the last 2 seasons and can't seem to find that good cruising prop. Currently running a Solas Rubex HR4 14.5 x17 stainless and she has to turn about 36-3800 to keep her up on plane. That's about 24-25 knots. Wide open she's turning about 44-4500 at about 33-35 knots depending on wind and load. Biggest weight add on is the extended platform(170 lbs). It's usually just my wife and I, 2 labs and 2 coolers. I've had a mirage plus 17 and 19 on it. Per the Searay archives the factory sent them out with a mirage 17. Didn't like either one. Maybe it's just the nature of the beast with that boat but I'd think that I could get it to cruise easy on plane with out being in the secondaries. It's really our only complaint now. Thanks for any help/ advice.
 
you shouldn't have to, although mine might not be factory. Also, if you remove that cabinet, you'll be dealing with electrical that you don't need to mess with. As I said, I might be wasting my breath if a prior owner already made it easy for me.
 
Hey guys, been following this thread for a few years and finally figured I'd join and tell u how helpful it has been over the last few years. My wife and I have done quite a bit of work and upgrades to our boat and a few of the ideas came from here.
Maybe u guys could offer some prop advice. Wondering what those of u with the 7.4bravo 1 are running for a prop. I've tried a few over the last 2 seasons and can't seem to find that good cruising prop. Currently running a Solas Rubex HR4 14.5 x17 stainless and she has to turn about 36-3800 to keep her up on plane. That's about 24-25 knots. Wide open she's turning about 44-4500 at about 33-35 knots depending on wind and load. Biggest weight add on is the extended platform(170 lbs). It's usually just my wife and I, 2 labs and 2 coolers. I've had a mirage plus 17 and 19 on it. Per the Searay archives the factory sent them out with a mirage 17. Didn't like either one. Maybe it's just the nature of the beast with that boat but I'd think that I could get it to cruise easy on plane with out being in the secondaries. It's really our only complaint now. Thanks for any help/ advice.


Hi Bugsy......you could try having one of the props worked, maybe make the blade area smaller or take some cupping out to reduce the torque need to spin it.......failing that a High 5 might give you easier planing with less power......
 
Also have a 1990 27 Sundancer with 7.4 Bravo 1 .. I managed to kill the stern drive on a rock and dont have the mirage prop pitch anymore (Prop was destroyed) Can you tell me what prop came with the boat or something you changed it to.

The sea ray site doesn't seem to have that model and the 27 pachanga is 17 pitch ,, That doesn't seem right for the heavier boat

Thanks
Anthony
 
Also have a 1990 27 Sundancer with 7.4 Bravo 1 .. I managed to kill the stern drive on a rock and dont have the mirage prop pitch anymore (Prop was destroyed) Can you tell me what prop came with the boat or something you changed it to.

The sea ray site doesn't seem to have that model and the 27 pachanga is 17 pitch ,, That doesn't seem right for the heavier boat

Thanks
Anthony
It took me a while when I was looking but our boats came from the factory with the Mirage 17 stainless prop. I haven't tried one but did try a mirage plus 17 and didn't care for it. Too many rpms imo.
 
yes, the whole thing had to come down

I have a 1990 27 DA trying to replace the factory install old AM/FM tape player in the cabin.. Looks like its in a tight box.. Do I have to remove the
bolts at both end of the cabinet and take the whole cabinet down?
 
Boat Sold this Summer, Looking for something else. Just looked at a 1996 Bayliner 3258 Commander. Can't believe how well it seemed to be built. We will see what happens.
 
Hi this is first post. I have a water leak in mid cabin behind fresh water tank. I have removed the tank and hooked up water supply to seacock to draw water from lake. I will attempt to post pic. The fiberglass has peeled back. I also have wetness on the floor where the hull meets the floor by the front berth. Any idea where the water is coming from ? Do you think the two are related ?
 
Where can I get the plastic insert that goes in side windows?
 
Where can I get the plastic insert that goes in side windows?

those windows parts are priced high at the manufacture. I think they are Taylor made brand. Never bought any parts but heard there high and only can get them through them directly.
 
New & first-time boat owner of a 1990 270DA. This thread is awesome for so many things that I may need once I get the boat next spring.

Question 1...Any Ontario / Toronto residents on this thread?

Question 2...Does anyone have the original manual & new boat package that this boat came with when purchased new?

Thanks in advance.
 
New & first-time boat owner of a 1990 270DA. This thread is awesome for so many things that I may need once I get the boat next spring.

Question 1...Any Ontario / Toronto residents on this thread?

Question 2...Does anyone have the original manual & new boat package that this boat came with when purchased new?

Thanks in advance.
Hi,
I leave in Markham, On. Just bought my 2001 270 DA in Sep. went out only twice. Can't wait until Apr.
I think you can find the manuals at Searay.com.
 
Hey @Samaral , thanks for the response. Where do you dock your boat in the summer?

I'm looking at Ontario Place or Marina 6 (between Spadina & Bathurst).
 
Hey @Samaral , thanks for the response. Where do you dock your boat in the summer?

I'm looking at Ontario Place or Marina 6 (between Spadina & Bathurst).

I am in a marina called Evergades in Perfelaw, Lake Simcoe. I sold my sailboat 1 year ago, and I used to be at Port Credit Yacht Club. I gave up the sailing thing, bought this 270 DA and decided to go back to lake Simcoe. I like to boat at Geogian bay as well. Stayed there a couple years at a place called Hindson Marina in Penetangueshene.
I know that right beside Port Credit Yacht Club(do not mix with Port Credit Harbour) has a nice pubic marina. Also Snug Harbour is not too bad as well.
 
New & first-time boat owner of a 1990 270DA. This thread is awesome for so many things that I may need once I get the boat next spring.

Question 1...Any Ontario / Toronto residents on this thread?

Question 2...Does anyone have the original manual & new boat package that this boat came with when purchased new?

Thanks in advance.
New & first-time boat owner of a 1990 270DA. This thread is awesome for so many things that I may need once I get the boat next spring.

Question 1...Any Ontario / Toronto residents on this thread?

Question 2...Does anyone have the original manual & new boat package that this boat came with when purchased new?

Thanks in advance.
Howdy Dudeism,
We've had our 270 for 20 years now, been all over Lake Erie, Huron and the North Channel. We boat from Port Glasgow on Lake Erie now. Anyways I have the original manuals etc., shout with your needs.
Bob
 

Forum statistics

Threads
112,944
Messages
1,422,720
Members
60,927
Latest member
Jaguar65
Back
Top