Separate names with a comma.
I haven’t pulled it yet to file and see if it goes away. Just took a video. Does this sound like 100%prop sing? Happens 650 rpm to around 1050...
So if some have you been watching I found a leak in one of my elbows. I ordered 4 new ones and got them yesterday. Here's my problem. The dry...
I had a couple elbows sitting around. These look to be NEW and never used. When I bought them they were listed that way too. If anyone needs them...
Hey guys. Last winter I replace the trans with a upgraded NEW ZF68 IV. In the video below you can here a squeal sound when put into gear. The...
Below video a video of the seal last year with the old shaft, trans, and prop. It didn't wobble last year. Below is what I did this year. There...
Just passing it along guys. This may save a motor. These elbows are stainless steel, but don't last forever. These have 13 years fresh water and 5...
Just got my new pumps and put together. I have to say.. These are my second set ( Just because I wanted to upgrade ) and I am impressed with the...
I was just installing my new props and noticed they don't slide up as far as my old ones. This may be okay, but just checking. My original ones...
Very well taken care of with around 380 hours. Transmission has no leaks and shifts into gear smoothly. The Transmission fluid was changed every...
I'm starting this so I don't mess up another members thread. I'm trying to figure out the connections. I see it has RGB and RGBW connectors. I'm...
Just looking around for options. I just got off the phone with Stainless. They tell me they carry a 5 year warranty on there kit, but are expected...
Selling both of my pumps with low hrs, the 5 3/4" pullies attached and impellers with only 50hrs or so. Both pumps are in great shape and don't...
Just wondering what you guys think. I bought a 43" tv for the boat that I'm going to mount in the cabin area. The mount I bought is rated for...
I have 8.1 Mercs and replaced the manifolds back in 2017 (5 years old now ). After EVERY ride I flush both engines with fresh water before calling...
So I have a Airmar In Hull P79 Transducer that works OKAY. Sometimes it doesn't work when on plane. This works through NMEA. I also have a Thru...
Does anyone else make one of these besides West Marine? If you know a site please let me know if you can find one similar at a little better...
Hey Guys, I'm changing out my ZF63 trans and replacing the mounts and cooler while I'm at it. Just ordered them. I'm just wondering about the...
I posted in Trans section also. Figured more will see here. Where can I find the bushings for my trans Mount? While it’s out I’d like to replace...
Where can I find the bushings for my trans Mount? While it’s out I’d like to replace them. 2004 340 Sundance ZF63IV. Thanks [ATTACH]
Hey guys.. As some of you know I removed the Transmission a few years back without pulling the motor....
