Separate names with a comma.
Also try SeaRayMan13 on ebay. https://www.ebay.com/str/SEARAYMAN13
3M 4000 is similar to 4200 but has UV protection.
Thanks, I'm working on the flushing setup for my main engines and generator, and using something like this rather than dragging the hose into the...
Nice setup. Where did you get the deck fitting labeled "engine flush"? I've only seen the ones labeled "washdown."
Diverters seem relatively inexpensive.
I had a custom cover made to fasten to the topof the windshield just so I could get rid of the other type. On our 225WE I hated having to crawl...
Any recommendations for hull and gasoline engine surveyors in the area? A friend is looking at a Sundancer with Merc inboards. Any input...
Thanks. Photo attached. I have a set of 6 including fender washers and nylon lock nuts for each. I also have a set of 4 aluminum backing plates...
Anything for points.
You're right, good catch. Someone (who is a sailor) did that when we were playing with it over multiple bottles of wine a while back, and I...
As said above, headsets make a world of difference. We use our cell phones with ear buds, but same thing. I made up a training tool for my wife...
Definitely can be done. On my 2002 225WE I changed all of the existing cleats to larger ones. I also added a new pair of cleats on the aft...
Knot 10 is well known in the Annapolis / Kent Island area. We came very close to buying a boat from Kyle Benvenuto at Knot 10. We really liked...
Congrats - Nicely done! IIRC from the prior posts, this trip was from Lindenhurst to Middle River with a fuel stop at Cape May? Thinking of...
They are in Philadelphia. "For at least the fourth time this month, an armed citizen in Philadelphia has been able to defend themselves from a...
Nice! That looks just like the boxed kit I made up before they apparently started selling the parts all together in a boxed kit.
This is what you want to use to fit the snaps onto the cover. https://www.sailrite.com/Quick-Fit-Pin-Socket-Snap-Positioning-System
Agreed. Another way is to countersink the hole with a countersink bit. I find that gives me finer control and is less prone to chipping. Either...
Like you said, my choice. I may carry in a number of different ways - or I may not carry at all - in different situations based on my judgement.
Not a matter of range time. When I am at someone's home with their children present I prefer not to have a round chambered. In my judgement, I...
