Separate names with a comma.
Dave - I think Tony Athens at sbmar.com has some good articles on Cummins aftercooler maintenance and reassembly...
Mine is not that way. The rollers are about $140 each(need 4) from Taylormade. Here's a source for $20 each. A dockmates was hard to moved and...
I use 210 on it:
Camco Plastic Cleaner and Polish | Protect Isinglass, PLEXIGLAS, and Vinyl | Spray | 14oz (40934)...
The 52 and 58 DBs have "common drains" on the port and stbd sides that drain onto the bottom paint - no streaks - a real luxury!! I just used 1...
Oh how fun!
We have met a number as they have passed through Tarpon Point Marina in Cape Coral and we've met some on our TN Tom and TN River travels over the...
@FootballFan is correct:
Great advice - I've been there too - never again!
Mine are due as well...now about my dingy steering cable - THAT IS LOCKED UP!!
Chris - I needed ones with wires instead of tabs...:...
LOL! I like Susan's suggestion - set the good one to metric and if they are the same on both sides, everything is OK!!!
As a pilot, I'm...
As Ken said, hold the reset button for about 5 seconds, then use the arrow keys to highlight °C/°F, then select °F, and turn the displaypower...
The battery in the display causes the display to revert to metric.
The battery on the MMDS board causes the hours to go haywire.
We use the closet next to the “wrinkler” as a pantry. Bottom two shelves are cleaning products, upper three shelves are canned goods.
I understand - I tell people my ER is either going to kill me or keep me young - and the jury is still out!!
Don't even think about going on the outboard side!!
That was fast Aaron!
Ken - Does your '08 have a flat plate TV in the JO Bunkroom?