Separate names with a comma.
[ATTACH] [ATTACH] [ATTACH]
I have the actual Mercruiser directions in my folder.
I’ll check them for you.
The plastic end of the tube has a raised ring around it 1/2” or so from the end.
The rubber bushing has a groove inside it. The ring on the tube...
Are your symptoms anything like I experienced?
Is this ^ what you were looking for?
Here’s the instructions for installing the new style water inlet
It’s Mercruiser part number 8M0080859...
Figure out how many gallons are needed to fill the tank, calculate the weight and add an appropriate number of passengers to simulate full fuel tanks.
I had a shift error with my 2007 240 Sundeck DTS.
Check this out.
It may help....
In the water, I use a scrub brush to clean the drive. Moving it up and down allows easy access to more of the drive.
It’s about $65-$75 for the Mercruiser one.
Well worth the price.
I use it frequently with the boat in the water, and even more so when it’s on...
The hot numbers are a better indicator, as that is the proper way to perform a compression test.
If this is the kit that you have,
Just plug this into the trim pump harness at the pump.
I would not recommend any type of remote that...
Double check all of your battery connections.
This spring, There was a small ground wire that I forgot to connect to the battery when installing...
Ok. When you said “larger lugs” I assumed (there’s that word again) they had the heavy gauge wire, like zero or 2 gauge wire.
Got it now.
Maybe I’m misunderstanding you. Are you saying that you hook up the remote stater in such a way as to pass all the necessary current to spin the...
Not quite. If you hook anything up to any large lugs, your remote switch better have some heavy gauge cables.
Best bet is to use the remote...