Separate names with a comma.
Time for a remedial Social Studies lesson.
The senate does not impeach the president.
Yes, just reply to your own post.
you cannot delete a thread once it’s created, a moderator should be able to do that.
How were the injectors cleaned?
A bottle of injector cleaner in the tank, or were they removed, flow tested and rebuilt?
You should go back and post this (and the part number) in your original thread where you asked for this information.
That way, the thread is...
What is the recommended thermostat for this motor?
Is it installed and operating properly?
Any issues with the coolant temperature sensor? I...
+1 for Trilux 33 (liquid applied with a brush)
my 2007 B3 has been wet slipped 6 months/year in salt water since new.
It’s not going to win any...
The end of the water hose that collapses can’t be seen by removing the outdrive.
you need to go inside the boat and remove the inlet from the...
I bought a small piece off of eBay.
In my opinion, that’s a complete waste of $800.
Brake fluid replacement every 3 years is the only service you listed that I would even consider....
No double seals!
What do you mean by gaskets? B3’s only use o-rings for seals when installing the unit.
Did you have a paper gasket present...
The last 2 vehicles were fairly common models with 3-4 dealerships within 15 minutes of me. (Honda Pilot and Jeep Grand Cherokee)
A line that...
I didn’t know that Mohegan sun had a boat show. Is it any good?
Maybe it’s worth the trip from Long Island.
Talk to Kevin C (post #7)
He should be able to fix it and also have it embroidered.
If I remember correctly, the people in the herpes commercials are happy too. Could it be that advertisers are twisting the truth a little?
I finished watching it 10 minutes ago, probably won’t stop giggling to myself for another 10 minutes.
Sort of, generally 300hp is the max for an alpha.
The switch is very cheap ($30-$40) the actuator is expensive, not sure of the price.
Check around the riser to make sure none of the wire...
If you have DTS, there is an actuator near the starboard exhaust riser that moves a shift cable. The cable end could be broken or the actuator...
It’s obviously too late now, but I wonder what the alignment looked like before the old gimble bearing was removed?
As far as the new bearing,...