Separate names with a comma.
The jack stand comments were likely intended for another thread?
Some reading for you:
Congratulations and welcome to CSR!
Great job! Congratulations!
Might be some info here:
Here ya go:
You say the prop "unhooks" when trimmed out... as you trim up, the prop essentially has no more water to push. Trim it back down until it hook up...
The guy posted once and never returned.
He actually sold it, but in his mind he still owns it :)
Does this boat stay in the water? Have you tried cleaning the external surface of the transducer?
Best of luck and welcome to CSR!
No doubt it would be better to have to make the cutout bigger. I'm sure there would be some wiggle room with the hatch... as long as the frame...
Defender has several in that size range. A couple of examples....
There's no doubt you will burn more fuel with a bigger boat with twin big blocks. But that's all a part of owning bigger boats.
Some reading for...
Do you have this:
I had a similar problem with mine when it was new... not slipping but it would not feed down the hole. The dealer replaced the line under warranty...
No reason at all to not fix/shorten it... that kink can't be good.
I would go ahead and get new hose also.
But yeah... Zeus pods, I don't know.
GFC, In "File Explorer", if you right click on your drive (OS C: for example) and go to "Properties", there is a "Tools" tab where you can...
Cruisers are not made for water sports... they are not agile enough and they throw a huge wake. You will have to decide if you want water sports...
The problem is that even what seems to start out non-political (POTUS got the Flu) turns into a pissing match between the liberals and the...