Separate names with a comma.
I replaced all my batteries on my 330DA with AGMs several years ago and have been very happy with them.
No it is not higher than the drain and the drain seems to be clear.
I’m going to try and put it on a bigger angle.
I can see it if I open the battery compartment and stick my head inside. The only other way would be to remove the access panels from the storage...
Been searching the forum for a few days and haven’t found anything. I have a 2018 SPX 190 with a 150 Mercury OB and hoping someone can explain how...
Anyone ever removed the main panels to get to the back of the radios in the cabin on 2008 330DA? I’m trying to hookup a fusion bt100, but cannot...
Thanks for all the help. Cleaned filter & checked voltage and AC seems to be working correctly now.
OK thanks and that’s good to know. I’ll try and run it while I have my generator on to see if it still happens. I’ll also give it a cleaning since...
When running my air this weekend I got an error message on my Turbo Cruisair 12K, SeaRay PN 1907352 that says the AC is low. Haven’t found any...
Thanks and my boat only came with the M1 Tracvision. When we used to spend weekends on the boat paying monthly made sense, however now we only use...
Hello, Currently have a M1 Tracvision on my 2008 330DA. Since I don't have Direct TV it's basically useless, so I'm wondering if anyone else has...
Thanks for the information Bridog. I believe my top speed so far WOT is around 44-45 mph. Probably not as concerned with going much faster as I am...
We take it through cuts in the lake and it seems when making sharp sudden turns we lose a bunch of speed. It also seems to have a lot of...
Harden Marine also makes a Stainless Steel version of these plugs....
Turns out the dealer gave me the wrong part number. Never checked the bottom of the actual sensor, but the correct number is 8M6000623.
Wondering if anyone has changed the stock Mercury 150 aluminum prop on a 2018 ‘19 SPX OB? I’ve read some online and it seems most fisherman switch...
Looks like this part number cross references to the one I used. Guess I’ll need to contact the place I bought them from.
Thanks and yes I kept the old ones. Once I put the old ones back in they read the psi right away. Just thought I’d put new ones in and save the...
So i’ve Read and searched the forums for information on 496 water pressure sensor replacements. I replaced both of mine this weekend, but they...
So, I've changed the plugs, fuel filters and checked the props, but I'm still having an issue. Also now the Port motor will not get past 3000 rpm...
