Separate names with a comma.
Show us your 420!
What did you do to aid the removal of the exhaust hoses? Warm up the engine? Let lubricant? Seem really stiff and stuck on there pretty good.
Blow backwards through the thru-Hull valve. Mine was slightly clogged causing the exact same issue, except for about every 10-20 minutes.
You guys are the best!
Recommend a good prop shop?
I believe all is original.
Excellent advice everyone.
Here’s to a great New Year!
That does help!
I have a lift now, so pulling them is not as big of a deal now.
The ECM contains the hours
Has anyone got any contact cleaner without distorting the gauge or glass?
What year/model is yours, Tim?
Is this the same repair approach for an 02 340?
Probably should plan on removing/cleaning/inspecting/replacing the roller dogs on my sliding door (2002 340) Can someone send me a link? I know...
I realize your post is old, but how did you deal with the "soft spot"?
Thank you sir!
I repair the fresh water circuit boards all the time. Have never had an led go bad, usually the 4 transistors. Simple devices to test. Remove,...
So my boat that I acquired used 4 years ago, is showing an unusual paint flaking problem on the port side stern.
If if was gel coat, I would know...
Please keep us posted with the Dryboat guys.
Very interesting website.