Search results

I own a 2008 44 Sundancer with the Cummins QSC 8.3 500HO. I have the optional hydraulic swim platform and I am in the market for a new console dinghy. I believe Sea Ray has a max weight of 800lbs for the platform. My major concern is not only what the platform can safely hold from a structural...

I own a 2008 44 Sundancer with the Cummins QSC 8.3 500HO. I have the optional hydraulic swim platform and I am in the market for a new console dinghy. I believe Sea Ray has a max weight of 800lbs for the platform. My major concern is not only what the platform can safely hold from a structural...

Just purchased 4 gallons of Pettit Hydrocoat. Can I use this on my stainless steel hydraulic platform? I know they make an eco formula that's made for metal, but is it necessary? I have been using this for years on my trim tabs and I never noticed any galvanic corrosion. As everyone knows this...

I own a 2008 44 Sundancer that has had this ongoing problem since last spring. It seems to be the strongest in the compartment where the salon AC is, in fact when that AC unit is on it intensifies the odor. I have tried just about everything. Bilges and sumps are spotless, there is no sign of...

I replaced my actuator but now my window intermittently will not go down. Sometimes it works perfectly and other times I have to hit the close switch numerous times even though I can hear the relay clicking in the EIM unit under the helm. I rechecked all connections and they are fine any...

Anyone know what bag the units they installed on a 2004 340 take?

I have a 2004 Sundancer and have been struggling with my tender for years. I have a Hurley H20 davit system but my integrated swim platform is too high for the davits to work properly. I am considering the Hurley H30 davit and would like to know if any members with my model boat have that system...

I just did a search and noticed that a few members have replaced their window vent actuators with one from Progressive Linear. I am interested in how they hold up in salt spray. The company claims it can only handle light splashes from fresh water. Are there any other options other than the $500...

Have a friend of mine thinking of purchasing this boat with the standard 5.0L Merc. Would appreciate any info you could give me on this model both good and bad ( ride, under powerd, outdrive corrosion,etc). Thanks.

Please help! I have a 2004 340 Sundancer with the 8.1L Mercs. Last summer I snapped my starboard shaft right at the taper. This was the result of metal fatigue. Apparently this is a common problem with boats equipped with the 8.1L engines because of the higher torque. Also Sea Ray uses Aquanet...

Started generator for the first time this season let it warm up and then put load on it to make sure everything was ok for the start of the season. Generator ran good and excepted load with no issues. After 10 to 15 mins with load on generator it suddenly shut down. I checked all fluid levels...

After flushing head I get a loud banging noise from the generator assembly. This noise does not occur during the first half of the pump cycle. At the second half the banging starts and gets louder as the vacuum pressure rises. Otherwise system works perfectly. Any thoughts would be...

Does anyone know how to replace the backlighting on this unit? It is a 2004 SC5000. Thanks in advance. :smt001

I am considering installing these on my 2004 340 Sundancer. I would like to here from anyone who has used them. Do they work as advertised? Are they worth 350 dollars? Thanks.

I own a 340 Sundancer that I purchased new in 2004. At the start of my third season I noticed that the black rubberized backing of the carpet was beginning to breakdown. I am curious as to how many people are having similiar issues with their carpet backing. What frustrates me the most is that...

Has anyone had the opportunity to use Shurholds new Orbital Polisher. Any feedback would be appreciated. :smt001