Search results

Hey, yesterday I have had a test run after a half year storage. With 5 adults I managed a speed of 62 Km a hour. I use a 22 pitch prop. But when I am full loaded with about 6-7 adults I have also a little trouble to go on plane. So I am looking at the new 4 blade/3blade props. gr Marco

Hello Robert, Nice to have you on the 240 thread :-) Have fun! gr Marco

Hi guys, I have a cosmetic problem with my steering wheel of my 240 Sundancer. First it began to crack a little bit, but a year later you can peel it of completely. It looks like a varnish of something. Does someone has a good idea to make this like new?

Good question.....

Hmm...maybe leaving the hand bilge pump intact. What about the two self draining hole in my engine hatch? I have at both sides a (left en right) a drain with a separat hole. Maybe connect the both sides to one hose and use the another one for the new bilge pump?

The extra bilge pump is "just in case" . You here a lot of problems with the standard bilge pump (rule) with the sensor. So I made a own system with some electronics (PLC driven) with its own sensor. The system will also send me a tekst message when there is water in the bilge (also sending me...

Hey Guys, I have installed a extra bilge pump (Jabsco utility 2000). Now I must connect a hose to put the water outside the boat. What is the best thing I can do. Drill a new hole in the hull or use a existing one? I have for example also a hand bilge pump on my 240DA. I never used it. Is it...

Thanks.

Hellothere, I have aquestion about light layout on my 240 Sundancer. I have aplan to change the standard bulb light (BA15S) into LED. So I putone in but no light. After measuring the voltage I see that the positive (+)current was connected to the shield and the negative (-) to the center...

Thanks guys....I will let the dealer do the job.

Hey guys, A few weeks ago I inspected my Bravo 3 outdrive. Because I had some issues with corrosion on my drive I had special interest in my Mercathode system. So the first thing I want to know if my Mercathode system was working fine. When the boat was in the water I had a reading of 700...

Thanks for all your comments!

Hello there, I the last year I have been extracting oil from inside the dipstick. Now I have been told that it is better/safer to do extraction from the top of the dipstick. So I am trying to make a connecting with thread on the dipstick. I am measure about 26.5 mm outsite of the thread.....is...

Re: Igloo Yukon Cooler Hey there, Does anyone changed the bow navigation light bulb for a led version? The orginal light is the 10 watt bayonet style bulb??? Is that a bayonet with the single connector or the double version? (the BA15S or the BA15D version) gr.

Hey, I have been told that you must put 1" or so free space round your bravo 3 when painting the antifouling. How can you make a good sharp curve of paint round the drive? Does someone using a template of paper/wood to do that? gr.

Do you have a picture of the place of the pucks from the red controller? I also thinking about black,blue or red controller. Are the pucks made of good (strong) material? Because replacing them every few years is not mine thing. gr MArco

Hello there, I have no Mercathode on my 240 Sundancer. I have looked everywhere. There is no blue/black controller and no wire's from the transom to the battery. So...now it is time to make a choice of the Mercathode. Shell I use the gimbal/transom version with the blue controller, or go for...

yep. Was about 2 years ago. I was nice because it had a battery installed. Now I have the 721 (for US that will be the 741). Its just perfect for me. Wifi bluetooth and (i hope in the future) a media tab for the fusion radio. The price for a 640 is tropped to extreme low prices.

Use 303

Re: Dash panels ready @ Islandhopper....Yes I have.... gr Marco