Search results

  1. E

    OFFICIAL 350/370 DA Thread (2008 or newer)

    Re: OFFICIAL 350/370 SD Site (2008 or newer) Can those of you with the Bravo 3 drives and Axius do me a favor and tell me what pitch your props are? Ours are 26 (not sure of the diameter), and our max rpm is about 4300 WOT. Boattest.com's review listed 22.75P props, and their testing got to...
  2. E

    OFFICIAL 350/370 DA Thread (2008 or newer)

    They are very hard to remove, but the lens with the metal trim ring pulls down from the ceiling. We've had to replace one bulb and it was a big PIA to pull the trim ring/lens off. Slide your fingers between the trim and the headliner and pull directly down.
  3. E

    OFFICIAL 350/370 DA Thread (2008 or newer)

    Re: OFFICIAL 350/370 SD Site (2008 or newer) There is a computer module in the engine compartment that wasn't programmed correctly from the factory. If I recall, it is silver, mounted on the forward bulkhead on the starboard side (where the main electrical panel, battery charger, etc is...
  4. E

    OFFICIAL 350/370 DA Thread (2008 or newer)

    Yes, I know that the backrest folds forward, but I was hoping to take the seat off to store a deflated dinghy and extra cords, hoses, etc back there.
  5. E

    OFFICIAL 350/370 DA Thread (2008 or newer)

    Anybody know how to remove the transom seat? We'd like some extra storage space for extended cruises, but I don't see an obvious way to take it out. Thanks!
  6. E

    OFFICIAL 350/370 DA Thread (2008 or newer)

    Re: OFFICIAL 350/370 SD Site (2008 or newer) Well, I spoke too soon. The arch/hardtop was making a lot of noise yesterday, as the lake was pretty choppy. Guess the dealer will be back out to look at it again. The bolts are pretty easy to get to, you just have to pull off the speaker panels...
  7. E

    OFFICIAL 350/370 DA Thread (2008 or newer)

    Re: OFFICIAL 350/370 SD Site (2008 or newer) Our hardtop was pretty noisy when going over waves until the dealer tightened the bolts. It quieted it down considerably, but still creaks when going over big waves. Hopefully the fiberglass won't start cracking on it...
  8. E

    OFFICIAL 350/370 DA Thread (2008 or newer)

    Re: OFFICIAL 350/370 SD Site (2008 or newer) Glad to see that there is finally a thread for our boats! I definitely agree with how thirsty she is. I get about 0.8mpg, and cruise at about 3400rpm at 32mph. The biggest problem we've had so far was the trim tabs not operating together (either...
  9. E

    Tabs won't operate together

    Tom, There is no indicator control. It doesn't have rocker switches. It has soft touch buttons that are computer/relay controlled. Ryan
  10. E

    Tabs won't operate together

    Hi all, We have a 2010 370 Dancer, and are having issues with the tabs. Both tabs will not operate simultaneously - neither both "bow up" or "bow down". I can confirm this by listening to the pump at the dock, and by the fact that the boat will roll to one side or the other when putting both...
Back
Top