Search results

My macerator discharge pump isn't working, could mine be this switch you noticed? My seacock is closed.

How would you stop leak in sunpad rail?

My 2003 320DA arch/cockpit lights were upgraded to RGB LEDs and I also added LED rings to my JL audio 6.5inch arch speakers since the arch wasn't deep enough for the back of the speaker.

I have a 2003 320DA and just had same issue last week with the heavy rain we got here on long island. I replaced the v-birth hatch gasket last year, but I think the hatch needs to be re-bedded. The windlass is in the anchor hatch so I don't think that is the issue.

I used smaller length screws 1" then what came with the mount so I wouldn't hit anything behind the bulkhead plywood. I pre-drilled to prevent any splitting of the wood. Also the 1" hole saw, I used a shallow one.

I went with Vizio 32" D-Series 1080P Smart TV, it has "free watch" TV, which is great. I can stream it from my phone or wifi. It has a ton of apps as well.

I want to replace my transom shower hose as it's all black and moldy and the shower head leaks, is it as simple as unscrewing the shower box and accessing the hose?

Here is mount I bought. I also had to drill new holes in mount because they blocked the ac power cord, this may not be a problem if you install a different model. MOUNT-IT! Low-Profile Fixed TV Wall Mount With Removable Plate | Flush Wall Mounting Bracket Fits 23" - 42" Screens Up To VESA...

Installed a new LED 32" TV in the 320DA today. Not that bad an install, tricky part was feeding the power cord through bulkhead (drilled 1" hole, don't let wood hole fall behind bulk head) and behind into the AC Panel with an electrical snake. I know there are other threads that have done...

Do you have any pics after removing the carpeted "kick panel"? I want to replace my shower drain as it so corroded and sharp edges. Or maybe where the screws are located?

The pad on my port side vibrates with the new JL audios speakers I installed, I noticed a fastener broken, are those easy to find/replace?

Did you have a mercury dealer reset the port engine, all engines come defaulted as starboard. I was told by Mercury to do that to get both engines to display properly.

I need gauges, any of them the sc1000 tach or speedo?

Doesn’t seem like he’s responding anymore, are you still selling the parts?

Do you have any pics of the foam and the final install. Thanks.

Does Tylormade still stock this gasket, is it the same from my power center vent on 2003 320 DA?

I’m interested in the actuators. No issues? We’re they making any crackling noise when used.

I had a feeling that maybe my way in. Will check it out. Thanks. scott

Do you have an inventory of what is still available to sell?

I heard to spray with PAM cooking oil after you paint them, old sailors trick.