Search results

  1. Loneranger

    Delta Galvanized Anchor 22 LBS $80

    Simpson-Lawrence (Lewmar) Delta Galvanized Anchor, 22 LBS $80 and it's yours. I have switched to using a spade anchor so I have no need of this one. The anchor is stamped with Simpson-Lawrence which has been taken over by Lewmar. New at West Marine this guy is $190 plus tax. My price is...
  2. Loneranger

    30 amp Marinco power cord with SmartPlug female end 25 feet

    30 amp Marinco power cord with SmartPlug female end and standard Marinco male end. Good condition. Works well. 25 feet long. Retail price for the standard Marinco 30 amp cord is about $100. The female Smart Plug end is about $85 retail. Or you can buy it as a complete cord package from Smart...
  3. Loneranger

    Celina to Knoxville TN. Cumberland River to Tennessee River

    Tomorrow we are paying to have our 270 Sundancer hauled from Fort Loudon Lake to Celina Tennessee to put in on the Obey River just above the navigable portion of the Cumberland River. We will be spending the next 2 weeks traveling down the Cumberland then up the Tennessee to Knoxville. If you...
  4. Loneranger

    Replacement cooler for Igloo 36 Marine Finally Found

    I haven’t posted anything on the forum for years but I felt this find would be of significant benefit to those who have a molded in place for an Igloo Marine 36 cooler and want something better. The Igloo is terrible. I finally found it, off of Amazon, an Echosmile 30. Slightly smaller interior...
  5. Loneranger

    FS: Bow to Beach boarding ladder $200

    I have an accordian style boarding ladder. 7 steps. I am not sure if it is manufactured by Bow to Beach but it appears to be the same ladder. I removed it from our boat since we had only used it one time in a decade. It includes the mounting hardware minus one stainless bolt that I had to cut to...
  6. Loneranger

    FS: Bennett Trim Tab Plates and Brackets 12 x 12, $120 for both

    I have a set of Bennett Trim Tab plates with the brackets and backer plates from a 2000 Sea Ray 270 Sundancer. I changed to a larger tab is the reason I have these. New they are ~$123 a piece on Amazon. I am asking half of that. So $120 for both of them. I will ask for shipping also but will...
  7. Loneranger

    V Berth Modification

    Has anyone modified their V berth to enlarge it? I am talking about something other than a better thicker mattress or topper. My plan is to remove the back rests and then finish the area that is uncovered. Also I plan to have a mattress made that will create an overhang of about 4 inches beyond...
  8. Loneranger

    Adding a portlight to sliding cabin door?

    I have an idea that I am bouncing around with the guys at Newfoundmetals.com, a maker of stainless steel portlights. When I boat with the children they are constantly opening and closing the cabin door usually briefly to check that we are still there I suppose. I think a portlight in the sliding...
  9. Loneranger

    New cockpit carpet pictures 270da

    I had new carpet made by a local firm. It is a Berber similar in color to the original sea ray product but with a beefier ribbed backing that hopefully will last longer. Cost about $450. I borrowed the snap tool and installed the snaps myself. The only thing I think that would make it better...
  10. Loneranger

    Quick Fist Mounting Clamps

    http://www.endroad.com/index.php/quick-fist-mounts.html I just bought two of the Go Between size clamps to try on the extra table support to keep it from rolling around (and it will have a dedicated space). As it is now it tends to get thrown wherever there is space and I forget where I put it...
  11. Loneranger

    Butyl Rubber For Deck Penetration Seal

    I came across this thread in another forum and thought it is great information. I use butyl rubber to seal things on my boat now and love it. The link below was actually in an email I got from ActiveCaptain. Thought I would share it some more. I think this is a repost by the same author of...
  12. Loneranger

    WTS Raymarine 240 VHF Radio

    I have a Raymarine 240 VHF radio that I do not need. It has never been installed. $300 plus shipping. I will charge the exact cost of shipping. The text below is cut and pasted. "Modular DSC VHF radio system with Digital Select Calling, optional second station control, and optional hailer/fog...
  13. Loneranger

    WTS Bravo 3 Duoprop Propellers 24 p set

    I have a set of duopros for a bravo 3 stern drive. They are in great condition. I have started using 22p on my boat and I do not need a third set of props. I am asking $500 for them plus whatever shipping comes out to be which will probably be about $50 but I will charge the exact shipping cost...
  14. Loneranger

    Best way to label wires?

    What do you use to label wires that you have added to the boat? I have tried using the label maker from the office but the label will not stick. Right now I have written on the insulation with a small sharpie. I am adding all the new wires to the factory wiring diagram using letters instead of...
  15. Loneranger

    Writing new wiring diagrams - computer program?

    I have added several electrical items to the boat over the last year. I plan on updating the factory wiring diagrams to indicate the new additions. Some items will be easy to do by hand but the stereo is a bit more complex so I was going to replace the factory page entirely with a new one. Is...
  16. Loneranger

    Where does AC green ground wire terminate on 7.4l engine?

    I was replacing a bilge pump hose that had a hole in it last week and noticed a green wire with a ring terminator on it loose in the bilge. It is about a 6 gauge wire with green insulation wrapped in black flexible plastic protective sheath. I did not have the time to trace it to its source yet...
  17. Loneranger

    Equipment Leakage Circuit Interrupters - are they standard equipment?

    The recent electric shock drownings nearby on Cherokee lake has had me reading a bit on the subject. One item I came across is an equipment leakage circuit interrupter. My wiring diagrams for my boat are not available right now. I do not think this is a device installed on my boat. Is this...
  18. Loneranger

    Source for black laminate covered plywood in small size.

    I finally received the back ordered fusion radio. The installation is stalled because I have not found a source for a material to cut the faceplate to support the radio. The part searay originally used is about 1/2 in plywood with a white Formica laminate on one side and black on the other. I...
  19. Loneranger

    Electrical drownings on Cherokee lake Tennessee.

    http://www.wbir.com/news/article/225567/29/Update-One-dead-in-electrocution-other-child-revived I have not been on the site for a while so sorry if it has already been posted but thought I would post this as a sad wake up to the dangers of electricity gone astray. This happened close to me...
  20. Loneranger

    Wiring Route and how to fish wires on Sundancer 270

    http://clubsearay.com/showthread.php/49553-Helm-remote-help-and-anybody-need-a-6-cd-changer-FREE If you will look in the above link I posted a fairly detailed pictorial path of wiring from the radio to the helm on a 2000 270 Sundancer. I told a few people that I would post this when asked in...
Back
Top