Search results

For sale: Pull-on davit systems for powerboats, with instructions and all new hardware. If you want to see a picture request with number below. Ask for Ted @ 9856340533 Asking $600.00.00

I have reduced the price to $800!!

That is what I have. Zodiac 310 Rib (fiberglass bottom)

Dingyramp XL by "Nautley" Covington,La REDUCE PRICE $600 For sale: Pull-on davit systems for powerboats, with instructions and all new hardware. If you want to see a picture request with number below. Ask for Ted @ 9856340533 Asking $600.00.00

Its seems that the litttle Island has some history to it. Pretty interesting reading. I would buy it if I thought it was in international waters. No Taxes!

I have a westerbeke 7.0 generator and they say to change it every 1000 hrs. When I got the boat it had 1400 hrs and I had no idea if the previous owner did it at a 1000 hrs, so I changed mine. I had to do some research on finding the belt because westerbeke had decided to discontinue the belt...

I make it part of my monthly maintenance to clean all rubber material and clean with a vinyl/rubber cleaner. Sun can be pretty harsh on rubber material. It takes me about 1/2 hour to clean everything.

If you have a slave solenoid it could be the culpit. About three years ago I had an intermittant issue with my starboard engine doing the same thing. When you push down on the switch the 12 volt passes though to the neutral switch (transmission) if it is closed, the 12 volts goes on to the...

You may have a leak or your smell might be from your holding tank. Yes, I did say your holding tank! For months when we passed one of our friends boat at the marina you could smell gas. When we told him that ( just bought the boat) he said that inside had a very strong smell of gas and that he...

I used the same switch but they do not operate the blowers themselves. Because you have only one switch for both (rated 20 amp) and each blower draws in 11 amps, I designed a relay bank to operate the blowers. The switch activates the relay (auto 30 amp rated) and main contacts pass the 12...

I used the same wire (14 gauge) but you may want to check to see what size you have. I also replaced the two blowers with Jabscos. They are very quiet and I leave them on all day. I install them 4 years ago and they are still running strong. Jabsco 4" 250 Cfm Flexmount Heavy 35770-0092...

I live in Covington, La and the waters during summer is pretty warm. So to keep from any type of growth in my a/c system, I use the bromide tablets found at swimming pool stores. It works pretty good and does no harm to your system. Ted

I am looking in replacing my fuel sending units (swing arm). What is the latest sending units that searay is using or does anyone know of a better type, more accurate.

Having issues with 7.0 BCG generator and I have been trying to locate an Ignition coil. I can not believe what they are asking for one. I have seen prices from $500 to $700 for one. This is highway robbery!!! Does anyone know of a good source?

I forgot to mention that I had vapor lock issues until I came across this service bulletin. I called my local searay dealer and they put a shield in between the exhaust mandifold and my fuel filter. On my boat I have two fuel filters per engine, one is mounted by searay and the other comes with...

I got rid of the inline blower(blade) and bought these: Jabsco 4" 250 Cfm Flexmount Heavy 35770-0092 Hodges Marine 2 $149.44 $298.88 They are squirrel cage blowers. Heavy duty,continuous and quiet. They do pull more amperage and your switch may not be able to handle the load...

Next time I'm cleaning my tank I take a look inside to see if thats what going in my tank.

This is a pretty good idea. In the past after flushing out the system I use to open the top to the tank(good way to get rid of unwanted guess) and use a hose, But this is much better. I also started to use galgon water softner which I would pour into the tank after flushing out the system. It...

I replace mine with Jabsco continuous squirrel cage blowers. During the summer time I run them all day. The only thing is that you can not run both blowers with the present switch on the console because of the high amp. I had to build a relay (2) bank and use the switch to activate the relays...

I forgot completely about that time of sending unit. It would be ideal, because I would not have to cut a hole though the floor under the ice box to get to my sending unit. Something to think about!