Search results

  1. J

    Holding tank gauge on 390 Sundancer.

    My gauge in the control panel only shows either empty or full, no 1/2 way mark ever. Is there a 1/2 way indicator ? On the holding tank in the engine room I can only see 2 probes going into the tank. Thanks.
  2. J

    looking for used Clarion Amp APX480m

    Most of us have one of those,if ever someone has one in working condition to go please contact me.
  3. J

    Cabin fridge and freezer not working well while at anchor on Sea Ray 390 2005

    Seems the fridge and freezer in the cabin not working as well when using 12v current. The fridge in the cockpit however is doing just fine under the same conditions. Any ideas ? Sea Ray Sundancer 39 2005 8.2l V-drives.
  4. J

    VHF Raymarine 240, even on 25 watts my broadcast is hardly audible

    Not sure if there is a volume switch somewhere but even on 25 watts people can hardly hear me while they do very clearly when I use my handheld portable VHF. Thanks
  5. J

    fresh water level indicator stuck on 3/4

    Any quick trick ? Fresh water level gauge stuck on 3/4 full all the time. Thanks.
  6. J

    hole plug for salon table base ??

    Any good ideas on how to plug the salon table hole base when not using the table? Sea Ray 390 2005
  7. J

    hole plug for salon table base ??

    Any good ideas on how to plug the salon table hole base ? Sea Ray 390 2005
  8. J

    Towing a PWC.... how much rope to be safe ?

    Thinking of towing a PWC (Sea Do Wake 155, about 450kg) with my Sundancer 320. How much tow rope should I use to be safe ?
  9. J

    no power transfer from genset to the boat ?

    Exactly right, there is a circuit breaker switch on the control module that was turned off. Quickly fixed. Thanks.
  10. J

    no power transfer from genset to the boat ?

    I have Kohler 5kw genset that runs smoothly. When I turn the main switch on to have the power transferred from the genset to the boat nothing happens. It worked just fine the last 9 yrs... I have a IOTA ITS-30R Automatic transfer switch hooked to it. Any switch or breaker somewhere I need...
  11. J

    Prestone level always low

    I have to refill my port engine prestone tank a few times per season while the other one is always fine. I have no overheating problems, not much difference in gph and see no leaks at all in the engine compartment. Any ideas ?
  12. J

    all lights on on Sea Ray 320 Dashboard.....

    Hello, I was surprised to see all the lights on (green) on my dashboard this week-end. Had to start the engines on EM start once to reset everything. Funny enough batteries were fine right after. Any ideas ? Thanks.
  13. J

    Has anyone tried a new set of props to improve performance on a 320 v-drives ?

    If so, what type of prop/improvement did you get ? Thanks.
  14. J

    Sea Ray 48 Sundancer with Cummins 540 qsc

    Anyone found out the performance curve for those engines ? Just trying to figure out best cruising speed...
  15. J

    I keep burning my Ipad and cellphone charger when connecting them to the boat outlets

    Happens when I am connected to shore power... Any ideas why ? Thanks.
  16. J

    Water won't stay in the toilet bowl....

    Seems the seal of my toilet leaks a bit, water won't stay in the bowl. Any idea how to fix that problem without having to change the entire head system ? Thanks.
  17. J

    Can you fit a Sea-Doo on a 390 or equivalent ???

    Hi all. Looking to move up to a 390 from a 320. Was wondering if there was a way to put a Sea-Doo somehow on the platform so that the kids will still want to come out on the boat... Any suggesstions appreciated ! Thanks.
  18. J

    Shower Sump Pump starts every minute or so...

    Seems the shower sump pump (and A C condensation) starts every minute or so for a few seconds, never really empties the sealed compartment. I put a new bilge pump in and a new float switch with same results... Seems the one way valve works fine also.....Any suggestions ? Thanks
  19. J

    Head System Breaker shuts off....

    I got my head system breaker shutting off seconds after i turn it on even if the tank gauge level shows only 1/2 full.... Any ideas ? Could the gauge be off and the tank full ?
Back
Top