for everyone asking for ice bins, for the sea ray 185 and 195 sport, as mentioned before I believe I scooped up the last one sea ray rad available before they had a new manufacturer making them who was putting the price up to $350 or $450 USD per bin. So many people have been asking for them and...
If you own a sea Ray 195 or even 185 sport from 2006 upwards. I'd rather the two piece bench seat but happy for the one piece, but I'd swap you my falling apart and cracking at the seams bench seats so that you actually have some you could repair if you are handy like that,
BUT
I'd ALSO give you...
Ok 1 order for 2x ice bins.
Anymore as the guy is doing them damn cheap?
Otherwise, would anyone out there like to buy the molds off me and make them their selves?
I figure I could sell the mold for $1,800 and then you could make a fortune selling them for $400 each.
(I'm taking...
Here is a link to all the photos I've mentioned except for the floor corner spiderweb cracking I'm having issues with. I'll take new photos of that tomorrow but here are images of the before and after work all done to this boat. You can see how bad engine was and the outside Gelcoat cracking...
In my sea Ray 195 sport 2006 I am to understand this has no wood what so ever in it.
(I'll get back to this)
So where the drain holes are on the deck that drain to the bilge area, I have a spiderweb crack that has a bit of a chip in the middle of it, right in the corner on the actual deck...
Was this boat looked at by the sea Ray tech and all this work done to the boat outside of the warranty period? We're you the original owner?
Does anyone know if sea Ray actually care about helping sea Ray owners like they have helped thiy, when the boat is outside of warranty OR/AND is a boat...
Total price with shipping and donation to lazydaze comes to $300 USD delivered to USA for 2x tubs.
Tubs are built by Fibre Marine in Guildford NSW Australia on my behalf as they are my moulds and a favour to me to help out people of this forum. Only available to members of this forum. Last...
That's Australian dollars. So about 67c USD to $1 AUD.
This is cheap which is why I say add $50 donation to lazydaze for all his help in these forums as I'm not adding anything on top of my price and I had to buy the last ice bin and make a mold of it knowing people would want these
For all those asking the price is $150 for 1 or $250 for 2. Plus $50 donation on top to lazydaze for all the help he gives. Shipping on top. Can send globally. See original thread for info about them
I can hook these up. Place I had do all my work took a mould from the absolute last one I could find on planet earth that any sea ray dealer had access to. However they cost a fortune. I can't remember if it's $500 AUD for 1 or for both. So about $350 USD either for each or for both. You got...
If it is like the 195 sport it has a back rest cusion and this gets rust running down. I found it was the bits behind the vinyl that hook the vinyl onto the hull. up out and out.
Have not been here in a while due to family issues but noticed this on long in and thought I would let you know i can get them but they are not cheap. See what else you find and if nothing then I can get some to you from here in Australia
If at WOT and fully trimmed when it goes off then you need to put the trim down a little bit so it is sucking up the water and the prop is not slipping.
[CENTER]The only way to make sure your engine does not suffer is to plug it into the diagnostics and see what the engine warning code is that is coming up.
However, if you are going full throttle and you are full trim then your engine alarm could be going off which i believe is either that it...