Search results

  1. Aaronpav2001

    Generator - Issue

    **************The model is a Kohler 5E Anyways swapped out the plugs, replaced the carburetor (which was a already rebuilt) and the fuel filter. It is running great purring like a kitten. Thank you for all of the help!
  2. Aaronpav2001

    Generator - Issue

    Kohler 5K. I believe the model says 7E. Approx 450 hours.
  3. Aaronpav2001

    Generator - Issue

    Pulled the wires and confirmed it is running on one cylinder. Switched out the coils and still running on one cylinder. Checked the spark plugs and They are good. Any other suggestions?
  4. Aaronpav2001

    Generator - Issue

    Mechanic is checking it out this week. I ran it Saturday and it ran well. Still cloudy water but she started right up and powered all the systems for a couple of hours. After that it started stinking heavily of fuel and I shut her down. started up Sunday for a few minutes. Again heavy smell of...
  5. Aaronpav2001

    Generator - Issue

    Impeller and service was completed over the winter. This was first time running out on the water as opposed to just testing at the dock.
  6. Aaronpav2001

    Generator - Issue

    Whatever you can find out would be great. Generator seems to be running well after un stuck the choke. Just have the chalky bubbly white water. thanks all
  7. Aaronpav2001

    Generator - Issue

    Whatever you can find out would be great. Generator seems to be running well after un stuck the choke. Just have the chalky bubbly white water. thanks all
  8. Aaronpav2001

    Generator - Issue

    All, yesterday was out on water and ran the generator for the first real lake day. Initial ran terrible. Smoking, struggling etc. The chock was stuck. It appears to be running fine now but the water it is spitting out is white and chalkey. It is not oil or full. It almost looks like super...
  9. Aaronpav2001

    Lewman foot pedals / switches 320 DS

    Anyone know what lewman foot pedal switches I need for 2002 Sea Ray Sundancer. The caps and gaskets are in great shape and were replaced but switches to engage the windlass seem to be shot. Links and websites are much appreciated. Also part number would be awesome too Thanks all.
  10. Aaronpav2001

    2002 320 Sundancer 320 Overheating 350 Mag MPI

    Looks like it was just a leaky valve. Replaced and appear to be good to go. Thanks for the help all.
  11. Aaronpav2001

    2002 320 Sundancer 320 Overheating 350 Mag MPI

    Also manifolds risers etc were all replaced in 2015. Moved the boat to fresh water ever since. Praying this is not the issue
  12. Aaronpav2001

    2002 320 Sundancer 320 Overheating 350 Mag MPI

    You are correct. It is closed cooling. I was confused.
  13. Aaronpav2001

    2002 320 Sundancer 320 Overheating 350 Mag MPI

    The boat is raw water cooled and seems to be pumping consistent water on both engines. I'm sure you guys can tell I am no mechanic. The boat has the two containers for antifreeze above both engines. Hoses have been inspected with no leaks and minimal antifreeze in bilge. Is it worth...
  14. Aaronpav2001

    2002 320 Sundancer 320 Overheating 350 Mag MPI

    Good morning and Happy Easter all, So I got the boat out on the water the other day after winter repairs and ran here easy for about 20 minutes at low RPMS between 2000-2500 and then ran her good between 3700 and 4000 RPMs for another 20-25 minutes. Boat initially ran and sounded great. Temps...
  15. Aaronpav2001

    No Water through Hull when heat is on

    The error message PS Low kicked on while I was not at the boat. when I left the previous day it was too warm outside for the heat to kick on? Could the system be damaged by not having water run through it? Or is there a safety shutdown when the error message populates? Thanks all!
  16. Aaronpav2001

    No Water through Hull when heat is on

    Which strainer do you speak of? I appreciate the response
  17. Aaronpav2001

    No Water through Hull when heat is on

    All, so I just put my boat back in the water and turned the heat on. Air is coming out but water is not coming out of the boat. I know a couple times after putting boat back in the water the it had to be primed. Basically spraying water into the exit port. Is this the best way to do this...
  18. Aaronpav2001

    2002 320 Sun Dancer Steering Issue - No response

    Thanks all. Fluid level was low. Now we are checking the seals for leaks.
  19. Aaronpav2001

    2002 320 Sun Dancer Steering Issue - No response

    All, looking for some help. Having some issues with steering using steering wheel. Started noticing the steering was loose and unresponsive at lower speeds at the end of last season but no real issues while planed out. Had the boat out of the water for winter maintenance and now I'm really...
Back
Top