Thank you indeed Skibum… the bottle’s cap “exactly” fits the -hole in the bowl-
After removing the cap, the internal vacuum accumulated in the line acted alone (w/o pressing the lever) returning to normal…
Many thanks everybody…
Hello friends, after a lot of time and tests, the matter has been resolved.
Everything was solved with the change of pads. The problem was the age of the original pads (some failure in them due to age).
In between, there was a change of batteries, battery charger, replacement of navigation and...
Hi Brian, Yes, in fact it seems to be the same problem.
After trials on tuesday evening, everything is normal. Crossover was cleaned, Heat Exchanger too. And of course the hoses as well.
I drain the engine to make a fresh water flush, but in this case it was not necessary. Engine was clean and...
probably was a mix, with a wrong coolant (I can guess brand due to its colour...:()
and maybe no winterizing since the boat born and actually lives in south Florida.
I'm still waiting the cleaning process to reassemble and try it..
Hi Everyone,
I've experienced unusual high temperatures over the normal lower rpm regimes for this engines (it is between idle and 2000 rpm) making a lot of trips trying to figure out what could happened...
In the meantime, I've made a complete service of 500 hs> coolant levels were normal, no...
This thing happened before...
http://www.clubsearay.com/index.php?threads/electrical-switch-help.11454/
Same symptoms, probably same solution... I´m waiting for ¨the technician¨
Yes it was S.C... Basically the problem was:
1. green led indicator lights from both Switch pads fading out and coming back.
2. After this, the things controlled (music, chart plotter, accessories...) switched off and on by themselves and new ones join the party (e.g Stbd Wiper) :rolleyes:
3...
Thank you Southern Cross! that was the first check today and doesn't work. I found both connectors. Port side pad had 12 v but not starboard... the EIM module don't give energy to the accessories so it need to be replaced...
So, after visiting local dealer who asks for it inmediately to SEA...