Search results

Sold.

One set of Bravo 3 22p 3 blade props. Refinished in May this year, in perfect condition. Put a new engine in the boat and going with 24p props. $600 for the set, shipping will be $50. If you want insurance, signature etc on the package it will be extra. Any questions please let me know.

Welcome from Norfolk VA!

I think I am going to go with the 350 Mag, but I am still going back and forth between that and the 383. I am getting mine done in March, not much point getting it done now and then winterizing it.

A fellow owner at my marina has one with a black hull and it looks really good. I contacted a local shop here in Norfolk VA that does very reputable work and they quoted $1500 to do a hull wrap, possibly a little more depending on how easy or not to remove the old graphics. Would have been...

Looking for a 383 Stroker or a 350 Mag MPI either new or reman. Let me know if you have anything or best places to get them from.

How much did you shorten the power cord and does it still have the lighted plug? Lastly, have you used it since you shortened the cord and if so did it run just as normal? Thanks

So, I cleaned up the engine bay where the obvious spray was, it is oil. I checked the oil level, checked the filter was on hand tight, looked for any hoses that may have come loose or damaged. Went out for a run locally and then checked the engine again and all looked well. I have my mechanic...

Will do, thanks for the suggestion.

Possibly. I am going to change out the filter and do a good clean up of the engine and see if the problem repeats. Hopefully, it is something as simple as that.

Oil level good, oil and filter change done at start of season, done maybe 30 hours. No leaks from dipstick area or filter that I can tell. It is like a speckled effect on the engine cover and slightly to the left of that as you are looking at it head on. I have someone coming to do a repair on...

I have just been out on the boat, 240 Sundeck, 5.0 MPI, and when I docked back up I noticed a very fine spray over parts of the engine, oily, but not thick, just very fine speckles. Ideas or suggestions at possible problems?

If your water psi is reading 0 then you may want to look at replacing the water pressure sensor. Just had mine done at the marina as it was reading 0 and now everything is back to normal. I believe the part is approx. $164 give or take. I didn't replace mine, the mechanic did, so I can't tell...

Hill Marine are recommending a 4 blade prop with a 20p. I have found a 3 blade 24p prop from a private seller that I can get for a steal, but, I'm thinking it may negativily affect overall performance, hole shot as well as WOT, or am I overthinking this way too much?

I seem to get around 4600 - 4800 rpm and maxing out at around 40mph, maybe a few more depending on conditions. Generally don't run WOT very often, more in the 30 -35mph when my wife will let me!

I had a run in with some unwanted debris this weekend and managed to damage one of the props, not badly, but enough to make the OCD in me frustrated. While looking online I have found a new set of 24p 3 blade props from a private seller and have managed to get a very good price on them. I...

We are having a boat lift installed this week (10,000lbs), for our 240 Sundeck. Never had or used a boat lift before, it has always been in dry storage. Any tips, tricks or advice on using, what to expect, what work you can do on the boat while on the lift etc? We are in Norfolk VA on brackish...

Good luck, I hope it all works out!

It is still working for me, never had a problem since (thankfully). The part is located in the middle section (approx) of the back of the engine. It was easy to replace and I have no mechanical knowledge to speak of. You really do need a 1" deep socket set and some kind of blanket to put over...

Yes, still have it. Sorry for the late reply, I have been on the road all day.