Search results

  1. F

    Quick fogging spray question

    S So what you are saying is turn off the fuel and run the boat until it runs out of fuel and stalls. Then remove the fuel filter canister and fill with the 2 stroke and stabilizer and run it again with the fuel line still off until it stalls from the mix?
  2. F

    Quick fogging spray question

    Great idea! I never knew there was a knob to turn off the fuel. I will look for this tomorrow!
  3. F

    Quick fogging spray question

    I did not and never knew I needed too. I will make a note of this when I winterize next weekend if the weather is nice.
  4. F

    Quick fogging spray question

    Hello everyone, Reviving my old thread from last year because I took lousy notes. Now I have more time and want to document what I do so I remember year after year. Yes I still have a 2009 Sea Ray Sundeck 5.0 MPI engine with Bravo outdrive. I’m still a little unsure on the correct method...
  5. F

    Swim platform fiberglass work

    Ok great! I’m glad it seems to be an easy repair for the right person. I’ll start reaching out locally! I didn’t hit it that hard. Must not be strong in that spot. Thank you for taking time to respond and help me.
  6. F

    Swim platform fiberglass work

    Hi everyone, I have a 2009 sea ray Sundeck. I damaged the swim platform when I was backing up the boat on the trailer. Is this something easy to fix, because I don’t think it will be that easy to find a complete platform to buy? If so is this something that is common for boat dealers/ repair...
  7. F

    Exhaust bellow keeps slipping off

    Excellent news! Since I dry rack my boat will leave it as it is for now. In the fall when I bring the boat home I will remove the exhaust bellow, prime And paint the bare aluminum and re-install the bellow. Thanks for everyone advice! Everyone rocks here!!!
  8. F

    Exhaust bellow keeps slipping off

    I tried bellows adhesive 4 times. The next day the bellow was off. I tried it on both sides at the same time, I tried it only on the transom side let it dry overnight, went back the next day to stretch on the outdrive side and it was on the ground. I tried it vise versa and it was on the ground...
  9. F

    Exhaust bellow keeps slipping off

    Hi everyone, Yesterday I was able to get to the marina and get some work done on the exhaust bellow. I bought a new exhaust bellow accordion style with the clamps on each end. I sanded off the old glue and gunk on the shaft tube of the transom and outdrive that the bellow clamps go on. This time...
  10. F

    Exhaust bellow keeps slipping off

    This is interesting, and could be why the exhaust tube is short……. I don’t have the boat local to check. I’ll drive to it tomorrow
  11. F

    Exhaust bellow keeps slipping off

    I was thinking of cleaning the gimbal and outdrive end where the clamps go with a wire brush and acetone. Then I was going to use the accordion style bellow that clamps on both ends. I was thinking once cleaned using bellow adhesive or black rtv/right stuff sealant and only clamping the gimbal...
  12. F

    Exhaust bellow keeps slipping off

    I thought it was weird also. I’ll have to get a better pic when I go back to the lake tomorrow.
  13. F

    Exhaust bellow keeps slipping off

    The picture rotated when I posted it. It is clamped on the gimbal end. It’s short and doesn’t reach the outdrive when all the way down. Noise is not really an issue. I just want to do it the correct way.
  14. F

    Exhaust bellow keeps slipping off

    Hello everyone, I have a bravo 3 Mercruiser. I have installed a new exhaust bellow about 2 months ago. I have the bellow that clamps on both ends. It keeps slipping off the gimbal end. Today I bought the exhaust tube that only clamps on the gimbal end, and when the drive is all the way down it...
  15. F

    Quick fogging spray question

    Any tips for next year….. I poured the stabilizer 2 stroke mix into the fuel canister and it overflowed when I put the cartridge back in. So next year should I get the remaining fuel out so there is more room for the mix or should I add that mix into the cup the fuel cartridge goes in?
  16. F

    Quick fogging spray question

    Excellent news! Thank you very much. Heading outside now…..
  17. F

    Quick fogging spray question

    Hi everyone, just had time off of work to look at the boat. Yes it is a fuel injected 5.0 MPI. My fault the throttle body looked like a carb. I should have know better. It is a bravo outdrive it has the 2 props. My fuel filter is NOT the spin on type it is a cartridge. Do I pour that mixture of...
  18. F

    Quick fogging spray question

    Hi everyone, thank you for the replies. I’m at work now and this is the only picture I have of the engine. Yes I believe it is a fuel injected engine. Just looks like a carb to me under the cover. I don’t think there are any cats on this engine at least none that I can see anyway.
  19. F

    Quick fogging spray question

    Anyone please?
  20. F

    Quick fogging spray question

    I’m in the middle of winterizing my 2009 Sundeck V8 engine. I am not sure if I should spray fogging oil into the carb while running until it stalls out or not. Is this the proper way to do this? I wasn’t sure if it would harm any sensors or anything. It’s very hard to pull each spark plug and...
Back
Top