We added the EVA foam from Amazon on the swim deck to keep the dog from falling into the lake. Was going to be temporary. It has been great for the past year or so. Does get dirty easy, wash with dawn and water, and it cleans up quickly. Not sure how clean-up would be in the cabin.
Denny,
I don't calculate mileage. We generally do not go that far and when the gauges get a little low we fill it.
We ran to Ron Jon's for the shoot out this year, both days. That is roughly 62 miles (16 miles each way, 2 days), I estimated we burned about 150 gallons of fuel. To be fair...
Denny,
We are at MM19 by the Grand Glaze Bridge on the State Park side of the bridge.
We went for a 34ft Crursier Yachts to the 370 AC, the Crusier had inboards so it was not much of a change in handling, the AC has a lot of square footage to catch the wind.
Hello Denny, Welcome to CSR
We purchased a 97 370 AC in July at LOTO. We love this boat.
We are trying to find a slip at TRL (Table Rock Lake MO) but have not found one yet. We may end up staying at LOTO another year. If you have any questions please feel free to contact me. I will be happy...
If you pulled the couch you may be able to set up some type of dinette. This layout was not designed to have one. Currently, we do not have anything in the salon, I am building a table this winter that will look like a dock. It will be more like a coffee table. We have a table and chairs on the...
I am not sure where you boat, I am on a lake in Missouri. I do not have any hard numbers to share as it not necessary for me and my location. I generally run around 1200-1600 RPMS which doesn't push much water and runs 8-9 MPH, cocktail speed. When the washing machine called Lake of the Ozarks...
ulrick65: This is a great boat, we bought ours in July. I would make the offer contingent on a sea trial in the spring if this is the one for you. There are not many 370/380AC's out there for sale, compared to SR's. You can state just about anything in a contract if both parties agree. Good Luck
We were at LOTO last weekend and actually had to turn the heat on Friday night because of the wind. Looking forward to this weekend should be great.
I know there is a 396 Carver going to Campbell Point marina, someone we meet at LOTO. AND if I can find a slip there will be a Sea Ray 370 aft...
I have a 97 370 Aft, I have a 12v breaker for a monitoring system that will not reset. I do not have any type of displace panel and have not really looked into this yet. Is this going to be the same type of dinosaur system that is not worth working on?
I always wanted a power boat, go fast, spend lots of $ on fuel, party, etc. I went out with a friend on his cruiser one day, a week later we bought a 30 cabin cruiser. 3 boats later we have a large cabin boat. Every time we go to the boat, from the first one, we always stay on it, either at dock...
We are still at LOTO, we did not make it to this event, however, most of my friends did. Cap'n Scuba Steve, the pic you took of the 375 DA with Ms. Liberity on the bow is a good friend of mine. Great video, thanks for sharing.
I had a miss in one of my 1997 7.4 MPI, I have done several of the same things. The mechanic at our marina told me that the computer controls the timing and when you do a full tune-up, the computer timing should be re-set. May be an option. I have not been back since he set the timing to test.
I spent 8 hours on the back half of my 370 today, compound only. Have not touched the bow or bridge yet. I did have to go over it several times do to lack of maintenance from previous owner just to get the luster back. I am using Presta super cut and a TCP buffer at 1800 rpm, very happy with the...
Glad to see everyone is having fun at TRL, we spent the weekend with family on LOTO and are spending the week up here on vacation. Little rain on Sunday but we stayed out anyway, love having isinglass and a hardtop.