Search results

  1. V

    Wtb 2007 sundeck enclosure

    Hello im looking for a full enclosure or a visor and side curtains kit. I currently have a black bimini top. Anyone looking ro.sell one let me know. Thank you.
  2. V

    5.0 MPI overheating

  3. V

    5.0 MPI overheating

    How old are the manifold and risers? Salt or fresh water?
  4. V

    Bravo 3 prop slipping

    Serial number is from the engine tag which matches the original sales invoice from marine max and also called mercruiser and thats the same outdrive number in there system. I am located in New Jersey on the barnegat bay.Drive serial number is Ow922026. Thank you
  5. V

    Bravo 3 prop slipping

    There is no strainer on the boat, its still using the outdrive as the pickup. I have looked on the regulator on the actual module and it was clean and was also replaced. Thanks about the measuring of the props.
  6. V

    Bravo 3 prop slipping

    Serial number from the drive. I am getting the same RPM from the gauge, and the tech mate scan tool.
  7. V

    Bravo 3 prop slipping

    According to serial number its a 2.2
  8. V

    Bravo 3 prop slipping

    That would prevent the engines performance no? The engine seems to have power, its the rprm/MPH ratio thats seems wrong
  9. V

    Bravo 3 prop slipping

    Also the props are installed by "clocking" them.
  10. V

    Bravo 3 prop slipping

    It is wet slipped, but these numbers are from the the day in the water and is still current 3 months later.
  11. V

    Bravo 3 prop slipping

    Yes that is gps speed. I have owned the boat for two Years, it has always been an issue. I bought the boat with issues. Max rpm used to only be 3300. I replaced both heads due to burnt valves, compression is 160-165 on all 8 cylinders. Fuel pressure is steady at 43psi at all rpm. Brand new NGK...
  12. V

    Bravo 3 prop slipping

    No rpm and speed increase together.
  13. V

    Bravo 3 prop slipping

    Thanks i know the actual props can not slip because its a solid hub, but something is causing them to ventilate or cavitate. The trim tabs are up all the way, and yes if i leave the drive down all the way, i will get to about 4200rpm and then if i start to trim up the boat will "release" to...
  14. V

    Bravo 3 prop slipping

    I have 2007 240 sundeck with a 305 MPI with bravo 3 2.2 gear ration with 22pitch props. I am have an issue with top speed. The boat has a great hole shot and can hold plane easily at 15 mph, but I am crusing at 3600 rpm at 25mph and i am maxing out at 4650 at 32mph. According the calcuatlors...
Back
Top