Search results

Last year I bought a 2000 410 Sundancer that had the engines swapped out in 2005 with the Mercruiser 8.1S motors. These motors have the Gen lll cool fuel filters but I noticed that I also have fuel/ water separators mounted on the bulkhead in the engine room. Can anyone please tell me if you...

I was having issues with my boat dying at idle or when coming back in to the dock. It would start fine, run well all day, but after coming off plane and putting the boat at ilde, they would start to sputter then just die. I couldn't get them to restart until after about 20-30 min. I have been...

This is the first time Ive had this type of inverter. There was no manual for it on the boat as well, which is why I am coming to here for help. (You've all been so helpful! Thank you!) When you are away from the dock and NO gen running, how do you have this panel set? When you are away from...

Can owners please chime in on this?? My set up: 2006 Merc 8.1s twin engines. (Boat is a 2000 410 sundancer) 2 batteries for port and 2 for starboard and 1 for gen. I also have 2 massive 6 volt Trojan batteries for the inverter. can anyone please tell me what batteries are 12v house? Is it port...

Here is a question for you electrical pros out there. I have 2007 Mercruiser 8.1S Horizon engines in my 410. Last weekend my voltage dropped on my port motor to 12.3 and the engine died. I couldn't get it started using the emergency switch. I started up the generator and let it charge my...

Here is a question for you electrical pros out there. I have 2007 Mercruiser 8.1S Horizon engines in my 410. Last weekend my voltage dropped on my port motor to 12.3 and the engine died. I couldn't get it started using the emergency switch. I started up the generator and let it charge my...

OK, so this is a first for me, but maybe I'm doing something different. The other day, I was getting ready to leave the dock and started my engines. I went to the shore power on my dock, turned off breaker, unplugged cord and started to feed the cord through the hole in the transom. (I take my...

I have a Cruisair with a SMX II control panel. When I turn on my AC switch on the distribution panel, It starts up in what ever mode was last. (Cool or heat) For the life of me, I can not get the set temp to be adjusted. hitting up or down does nothing while the SET light is lit up. When I hit...

Can someone with this same Inverter/Charger help me with some questions? 1. When your generator is running, what do you have selected on this screen? (underlined is whats selected on mine) is that correct? 2. When generator is running, which AC IN light is illuminated? (Mine is the AC1 which...

I noticed that the alternator is connected to the starter with a 90 amp fuse, then the starter has a cable to the battery bank for that engine. Has anyone bypassed the starter and just got straight to the positive on the battery bank? Why is it set up this way originally? Anytime you have...

Alright sundancer owners.....please help. 7.0 kw Westerbeke Its never given me issues in my whole 2 weeks of ownership, now it is. I went to start the generator and it give me a loud beep at the SR systems monitor display Here is my procedure: flip on generator solenoid hold down...

I have a 2000 410 Sundancer. New to me. Lately, I have been dealing with immediate drop in voltage and engine shutting down at idle speed. At initial start up, I have 14.2 volts. I can cruise around for 30 min at around 1000 RPMs with no issue. Then, while docking my engines immediately just...

Has anyone replaced the factory Clarion Amp in their 410? I found the 4 channel amp behind the starboard side seats but I am wondering how they set these up from the factory. In total, I have 4 cockpit speakers, 1 sub and 4 cabin speakers. Did SeaRay run all those speakers off that one 4...