Search results

this is the only picture I have on my phone I was putting them back in the boat from painting them

The boat originally came with gas mercruisers, the previous owner repowered with the star power 7.3l diesels. The diesels are the same as the 7.3 international or for power stroke engines mercury bought them out at some point and made them for a couple years. The only problem with them is it is...

Has anyone had their 380 painted ? I got a quote of $28000 to have a bottom job done and the whole outside of the boat done from water line to the top of the radar arch in awlgrip but nothing inside the cockpit does this sound about right ?

Does anyone have the prop shaft centerline measurement for 99 380da? I am looking for the distance between the 2 shafts

Does anyone have the prop shaft centerline measurement for 99 380da

Is there any adjustment at the throttle lever? On my port throttle I have to move it way more in either direction before I see a change on my rpm’s. And once the change happens I can bring it back even with the starboard lever with out any change to rpm’s

I am having trouble with my vacuflush system I have replaced the seal at the toilet , bellows, duckbills and pressure switch I can now get the pump to build vacuum and shut off but only for about 5 minutes. Where else should I check for leaks and what is the best way to check? How do I access...

I am getting ready to change out my old Norcold de461 with a Vitrifrigo 2600i. From what I have read on the form I am going to have to make a spacer to go around the refrigerator, but looking at the specs on the two I do not under stand why the vitrifrigo will not fit flush in the cabinet . Can...

Does anyone have info on a cruiseair SXM thermostat? On one of mine the temperature keeps going up to 99deg and the other none of the buttons seem to work am I able to use a hous style thermostat in its place or do I have to go back with the cruiseair/dometic ? If I can use one like I have at...

Has any one ever done a swap from a Borg Warner 5000 series to a ZF 63IV in their sundancer ? If so what all was involved and needed ?

What size duckbills does my 1999 380 take for the vaccuflush system are they 1.5” or 2 “?

I have always had high performance boats in the past and know what insurance should run on one but I am a little lost on a cruiser

Galveston Texas

I just purchased a 1999 380 Sundancer with 330hp Diesels . What should insurance cost yearly?

I have a 380 and can’t figure out how to get the port and starboard side upholstered panels off so I can have them redone I have attached a picture of what I am needing to remove

Does anyone happen to know the model number for the galley refrigerator on a 1999 380 Sundance ? Also how much is involved in replacing it ?