Search results

Please contact me at dta914@gmail.com.

Is anyone still interested in the original keypad? I have a brand new starboard side kidney shaped keypad with black surround, original part # 1718618, as well as a used port side pad, original part # 1606581 with wood grain surround.

Ok, problem solved. I was able to move the starboard shifter up without pushing in the throttle button in, to a point near the neutral position. Starboard engine started fine. Then did the same with the port shifter, moving without pushing in the throttle button. When the shifter was near...

Hi Phil, thanks for your quick response. When I had the problem on the Starboard engine, I did just that, pushed in the button on the side of the shifter and moved the shifter until the button clicked. Then the starboard engine was able to start and ran fine. Then tried the same procedure on...

Need some help. Starboard engine started only after the shifter was moved back and forth slightly to finally hit neutral position. Tried port engine, would not start. Shifter may not be in neutral position but moving shifter while pushing in the side button to hit neutral position didn’t solve...

Ok, problem solved. Bad fuel. Even though we tried to start the engine using ether, apparently that wasn’t enough to make it fire. Thanks Hughespat57 for your very prompt help and suggestions. It’s very much appreciated.

The technician bypassed the boat wiring and tried to start the engine with the same negative result. No 9 in my wiring diagram is Smartcraft unswitched power. If I’ve done this properly, see attached file. Having bypassed wiring from the helm and still not having the port fire up leads me to...

Hey Guys, Need some help. 2005 Sundancer with twin 5l MPI Bravo lll with 190 hrs, I had to replace the failed EIM units and go to hard wired helm with fuse boxes. All functions of the previous soft switch pad work properly, and the starboard engine fires up perfectly, but not the port. It...