Search results

  1. S

    Looking to confirm SmartCraft Network / NMEA 2000 Network / Raynet

    will this work with cummins bta5.9 mercruiser smat craft 1.0?
  2. S

    Official (1998-2002) 310 Sundancer Thread

    if you see 14-15 volt on the charge is mean it is working so there is a problem between the controller and the batterie check current to batterie if you dont have 14-15 volt look for a bad connection damage wire or fuse
  3. S

    Best Boat Wax

    Try so many over the years but the best and easyest is Light Cleaning / buffing: Star-Brite Cleaner Wax with PTEF Wax: Star-Brite Premium Polish with PTEF
  4. S

    Official (1998-2002) 310 Sundancer Thread

    Big block have a lot of torque so we dont talk about twice but for sure it have more torque. For the fuel on the other hand we are more talking about 1/5 of what you burn
  5. S

    Official (1998-2002) 310 Sundancer Thread

    You are deadly wrong diesel are different animal, HP mean notting torque rules on a boat 250hp diesel is way stronger than your gazer.
  6. S

    Official (1998-2002) 310 Sundancer Thread

    I have the same size boat when i originally buy the boat it was delivers with twin 7.3 MPI gazer that boat was a pig. I repower it 7 years ago with same engine and drive combinaison you have and Diesel are so much better no comparison, boat is more silent on plane, way more stronger with tons...
  7. S

    Mercruiser d-tropic

    I will begin on fuel filter for sure. Any update on this?
  8. S

    Official (1998-2002) 310 Sundancer Thread

    For those who don't want to loose a closet or cary a big hose and I buy this portable Vac and it does wonder for a small boat like this http://www.coolproductreviews.com/eureka-handheld-vacuum-71b-review/
  9. S

    Official (1998-2002) 310 Sundancer Thread

    Seem like this pump is only for RV Im out of luck with this one I have diesel but the battery are just under the pump so I will choose someting else Safety Tips: 1. Never operate the pump in an atmosphere where flammable gases may be present, since arcingat the motor...
  10. S

    Official (1998-2002) 310 Sundancer Thread

    Thank paul it is direct replacement I was blind, I look in the manual before ask but could find the dam pump.
  11. S

    Official (1998-2002) 310 Sundancer Thread

    I want to change my drinking freshwater pump to something more smooth and silent but my boat is far from here and I wont go till a couple of week. My question anyone with a 1998 could tell me what pump is there and what amp is the original breaker so I could do a direct swap as I don't want to...
  12. S

    New rib 10 AB UL

    Just want to share I retired my old caribe 12 foot and buy a 10 AB UL ultalight with aluminium hull What an upgrade this ding is so light at 95pound I put my 15 yami 2 stroke on it and I literally fly. No other combo 15HP Rib could follow me at full throttle I simply lost them all. The front...
  13. S

    How long professionally repaired patches last?

    I send my AB to professional repair after mice eat it in the winter they put 7 patch on it and they all blow on the first inflate. I then try my self 3 time to redo all after reading, spending 500$ I just decide to buy a new one. I dont understand why I know it is not rocket science to do but...
  14. S

    Educate me on diesels

    I just love my small diesel and will never go back to gas no way!! it is safe, I have power, crazy range it cost me less than a 18 foot boat and everywhere I go everyone want to buy it......best off all I have it for years and I love it so much I dont want to upgrade it!
  15. S

    Repower SeaRay 310DA 2x 7.4MPI bravo 3 to 2x mercruiser D4.3L D-tronic bravo 3

    Yes you need to remove all the lower front to the carpet and the fridg will sit right in the the back bottom. you need to order the fridg option with the motor install on the top back. They have this option available it is really important or it will not fit.
  16. S

    Official (1998-2002) 310 Sundancer Thread

    4500 will not fit and yes for the doors
  17. S

    Official (1998-2002) 310 Sundancer Thread

    there is 2x scew who hold the plexiglass door to the sliding track. the black track will stay there and only the plexiglass will come. there is also 4 screw on the top of the plexiglass who hold the roler bugy. then you will be able to remove the door. take you time it is not easy to get it out...
  18. S

    Gelcoat Shine, but No Depth.... Why not???

    my friend is a boat detailer and told me the same.........I give him some menzerna super intensive polish to shut him up.....guest what he now use menzerna
  19. S

    Gelcoat Shine, but No Depth.... Why not???

    After the compound boat was shiny like a miror I use only a sealant Ultima Paint Guard Plus take 20 minute to do all the boat compare to a day with merguiar flagship and so far it last a way longer use it on my inflatable also and it dont get dirty anymore
  20. S

    Gelcoat Shine, but No Depth.... Why not???

    Yeah that one with a Rotary it do miracle for me :)
Back
Top