Hello Everyone - Im experiencing some water pooling in both engines in the exhaust manifold on my 2000 340 Sundancer w/ 7.4 MPI engines. This was a project boat that I bought last year with rebuilt engines, however the boat was inoperable and none of the "fixes" were on it at time of purchase. I...
Hi Everyone - I was curious to know what my 2000 340 weighed with 7.4mpi's and V drive configuration, 4 batteries and 3 cylinder 5.0KW Westerbeke gen set. I took the boat to a certified scale and weighed it - it came in at 17980 lbs on the trailer. I had weighed the trailer previously at 2320...
Hello Everyone: My wife and I are restoring a 2000 340 Sundancer. It originally came with an icemaker built in the cockpit area which was gone when purchased and we are trying to decide whether it makes sense to replace it or put a 2nd fridge there. We live in Tampa FL so the climate is hot...
My wife and I bought a 2000 340 Sundancer that the previous owner started redoing the upholstry in the cabin but did not finish.
We need help figuring out what Searay used to hold in place the perimeter cushions in the 2nd stateroom? There is a 1"x1" board in this picture that is screwed to the...
I bought a 2000 Searay 340 as a fixer upper and its sitting on stands. The port side drive shaft wobbles and makes a rattling noise when I put it in forward gear or reverse gear. No noise in neutral. I've aligned the shaft but the result was the same. Im gonna include a video and hope someone...
Hi Everyone - Looking to replace the locked up windlass motor in my 340 Sundancer. It is a Progress 1 unit and the parts schematic shows both a 700 watt or a 1000 watt motor to chose from. Can someone give me some good working experience as to which one to chose? There is a significant price...
Looking for someone's experience for this type of material. Im thinking of installing it with glue in the cabin of my 340 Sundancer - How did it hold up, was it easy to clean etc, etc, Anybody?
Im working on the vacuum generator for the toilet and found a plastic disk in the bottom of the tank. After pulling it out, now wondering where this came from since I can't seem to see anyplace in the vacuum gen/tank system it might have come from. Apologies for the gross pic.
Anybody? Thanks Gary
I just bought a 2000 340 Sundancer with an ECM issue on one engine.
If I energize only the STBD main battery solenoid switch in the cabin, the volt meter indicator shows voltage but no power actually powers the switches for the accessories like cabin lights, stereo and other switched on...