Search results

  1. F

    WTB convertable top for 2000 SR 180BR

    try calling searay them and ask for part number + manufacture... and maybe you will get good news that the company that made it is still in business.
  2. F

    WTB grab rail grab bar from 1989 180 BR

    you can always send part request for searay over to: pom.parts@marinemax.com I use to work for them.
  3. F

    Mercury - Power Trim Assembly - Qty: 3

    Hey Everyone, I have 3 Power Trim Assembly. the center Assembly was leaking, and the Port and STB unit is working fine. Customer decided to replace all 3 units. $1500/ea for the good unit 650/leaking unit 954-816-1641 call or text me
  4. F

    OEM Mercury Parts 5.7L, 4.3L and MORE

    Hello Everyone, I have a few parts on hand that I want to off load. all being for 5.7L / 350 Merc Cruiser parts. OEM MERCURY Alternator: p/n:863077T Qty: 2 - Price: $320/ea Starter motor: p/n: 863007A1: Qty: 2 - Price: : $215/ea Thermostat housing: p/n: 863457A2: QTY: 2 - Price: $335/ea...
  5. F

    A hand full of parts, if your hands are a giants hand.. lol

    Hello, I have many boating parts that we trying to sell. Some are new, and some are used. . please take a look at our extended list. (NEW)Bennett A1200S - Small Actuator - Qty: 2 - Price: 100/ea or 2 for 185 (NEW)Seavision SV19 - Underwater Light - Qty: 4 - Price 550/ea or 2 for 1050 or 3...
  6. F

    Mercury VesselView 502 Screen only. asking: $450 + shipping

    Hello Everyone, I have a Mercury Vessel-View GLASS screen only. It functions without a problem. Looking to get $450 + shipping for this unit. PM for more details.
  7. F

    Posting Images - "How To"

    All I have for buttons are "Manage Attachments" under additional option and I used 48 of 48kb. NOW what????
  8. F

    Brand new pair of bullet speakers

    make an offer
  9. F

    496 8.1 Back Firing Through Flame Arrester.

    8.1 doesn't have distributor cap, but could also be other you mentioned.
  10. F

    496 8.1 Back Firing Through Flame Arrester.

    Check fuel pressure. Should be 38-43 lbs depending on load. Check if fuel pressure is low when engine is popping. Other than that I had a few that injectors weren't flowing enough, I pulled them out and had a shop clean and test them.
  11. F

    Water Pressure sensor

    I would run it and watch the water pressure. If you have a 2011 you probably have an Ec motor which has catylic converters (hopefully I spelt it correctly). Those motors need a little bit more water pressure or you will have that alarm sound when you get on plane. If you run it and get on plane...
  12. F

    Water Pressure sensor

    was the boat on a hose or in the water and he was taking it for a ride? He should of turned the ignition on and looked art the water pressure since it should be at 0 and if it was anything than or over 1lb, the sensor should be replaced. Then he should of started it and watched the pressure...
  13. F

    Stalling problems after starting.

    If it keeps vapor locking, there is a kit you can buy that is a second fuel pump that installs before the spin on fuel filter that will eliminate the problem
  14. F

    Engine temperature difference

    You probably have a stuck thermostat on the port engine. If the port engine thermostat is stuck open the motor won't get up to temperature or take a long time to. When this is happening the water pressure will be lower then the other motor since a closed thermostat will give a restriction and...
  15. F

    Water pump?

    Wen was the last time you replaced the impeller
  16. F

    Loud Cracking Noise - Near WOT

    Glad you got it fixed. I didn't read all of these post but I do see you had someone do a service. Do you have a invoice that shows everything that was replaced, and if so I would check to,make sure it was
  17. F

    Loud Cracking Noise - Near WOT

    I've had caps that would pop every few seconds while running wot, and others that would make the motor lose power also and break up real,bad. I doubt it is the out drive or gimble brg. I would runthe boat with someone close to the engine to try and pinpoint the noise
  18. F

    Loud Cracking Noise - Near WOT

    Have you had someone listen to it while your driving, to see where it's coming from? Like from flame arrest or or somewhere else? Only had problems like breaking up on newer mpi engines and it was the cap and rotor. You could try ignition components
  19. F

    Loud Cracking Noise - Near WOT

    What engine do you have? Is it the v6 carbureted?
Back
Top