chartplotter

Hopefully not jinxing this but I will be buying a used 2016 270 Sundeck next week. It has the standard four analogue gauge cluster but I’m hoping to swap that out for the digital dash /chartplotter that was an upgrade option when sold new... As a newbie to Sea Ray boats I was wondering if anyone...

I ordered and updated my new CF card for my E120. I bought it straight from Navionics and it stated that the version purchased was compatible. My problem is that the chart detail is not loading. Any suggestions on how to get it to read from the card? Is it just plug and play or is there more to it?

I need to change my CF card out and there are what seem like endless options online. My boat spent her entire life in the Ozarks and is now on Lake Michigan. I have the KS-MO-OK-AR-LA-MS card out and need the Great Lakes in. Any advice which one and where to buy?

Hello All We recently bought our first boat and being handy, I’m hoping to save a little money by installing a Chartplotter/GPS unit myself. The mounting is a no brainer, but I don’t have a clue where to connect the electrical. I’m assuming there are terminal blocks somewhere for all the cockpit...

Hey all, Boat show season is coming up and I am planning to replace the Raymarine C80 unit that came with the boat when I bought it. I have my eyes on a Garmin 7610xsv and will also add the radar to replace the current one. I wanted to know if anyone had setup that unit on a 2007 Sundancer 310...

We just purchased a 2000 340 Sundancer and it has nor radar or chartplotter, never installed, only a old Raytheon GPS unit. We are going to e using the boat n Northern California primarily in the Sacramento Delta and in the Bay on occasions. Have a budget of 2500.00, I was going to go with the...

Hello all, i am about to drill into my clean transom to install the chartplotter unit i just purchased. i plan on predrilling screw holes and filling with 4200. the wire will pass through just below swim platform and needs a 1" hole which will also be filled with 4200 after wire is secure. Is...

Just bought new electronics. All radar/chartplotter parts and east coast chip from a 34 Sundancer for $1000. Everything works fine and I have the chartplotter cover. if interested I will send photos

I am trying to install a new chartplotter on my 2004 280 DA. I was planing on using the ACC1 switch on the helm. I was expecting to find a place to connect the power somewhere behind the helm. Do I need to route the power to the forward EIM, undo the cover to the EIM and plug it in there...

Just purchased a 2006 34 Sundancer with a Raymarine C80 and I am looking to upgrade the radar/chartplotter and possibly have the ability to add on later(auto pilot, mechanical readouts). We boat in Long Island Sound and i was set on the Raymarine E95 but I was advised to go with Garmin 5208...

Hi, as I am trying to figure out what to do with the chartplotter in my "next" boat - i'm working on a size reference. And I thought - even though it is not complete - I'd share it - and maybe get some feedback on the ones I have not put in yet. So treat this as an "alpha list" best...

Hey guys, new to the CSR site....fantastic resource. I'm looking for any of the cables and power supply units for the Sea Ray Navigator 2 unit. I was recently able to purchase the CPU off of ebay, but it came completely bare, and I need to locate all of the hardware for it. I have the GPS...

I'm looking for a GPS antenna a transducer and fishfinder module for a Sea Ray Navigator 3.0. Do I need to use the original parts or can I use a generic tranducer at 170khz, and a generic GPS antenna. Also can I use the faria fishfinder module for the Sea Ray 3.0. I got the Navigator head unit...

I'm looking for a GPS antenna a transducer and fishfinder module for a Sea Ray Navigator 3.0. Do I need to use the original parts or can I use a generic tranducer at 170khz, and a generic GPS antenna. Also can I use the faria fishfinder module for the Sea Ray 3.0. I got the Navigator head unit...

I'm looking for a GPS antenna a transducer and fishfinder module for a Sea Ray Navigator 3.0. Do I need to use the original parts or can I use a generic tranducer at 170khz, and a generic GPS antenna. Also can I use the faria fishfinder module for the Sea Ray 3.0. I got the Navigator head unit...

My Raymarine SL72 on my 340 is vertical/portrait alignment but all the new chartplotters are landscape wide view. I'd like a good sized replacement but i'd have to modify the dash with a starboard fill in piece, etc. It would be a lot easier if there was a large view vertical type GPS on the...

I have for sale a Garmin GPSMAP 3210 Chartplotter for sale. Included is everything that would have come with it when purchased new (except for the box), which includes: GPS17 flush mount antenna Bail Mount Protective Cover User's Manual Preloaded U.S. marine detailed maps (g2...

I have a brand-new never-used RAM-Mount (RAM109HU) for a GPS or any other device. I purchased it to mount a Garmin GPSMAP 3210 Chartplotter (10" diagonal screen), but ended up never using it in my boat. It is rated to hold 10lbs...most any GPS out there. It has a horizontal swing arm which can...

Hello, I'm wondering if anyone knows where I can buy the latest Navionics Gold chip for my Raymarine c80 chartplotter? I just purchased a boat and the one in there is from 2005 on not the correct region. Any suggestions would be appreciated! thanks!!:smt001