nmea 2000

I have SR310 DA 2008, and looking for the best location to install the NMEA 2000 network. The easiest power location is under the helm, but space too tight. Looking for recommendations on where you installed yours? pictures would be great if possible.

I think the next addition to the 240DA will be integrating SmartCraft into my Axiom-9. I have had a few scares when 17 year old gauges decide they are tired and indicate zero oil pressure and such while underway. I have also had a couple mystery alarms that would have been not such an issue to...

I’m desperate for a little help, I have a 2006 40DA dancer with Cummins diesels. I purchased the garmin 8616 and the multi engine Mercury gateway NMEA 2000. The led flashes on the gate and it’s shows it connected on the garmin under networks but I can’t get the icon to show for the engine...

Hi everybody, I’m a newbie to this forum. In process of purchasing a 2002 Sundancer 300 with 5.0 Mercs. Survey/sea trial in a few days. Has an old Raytheon TriData ST50 and a newer, but basic Garmin GPS. Not sure what info he displays now on the ST50. Plan to do some flooring and electronics...

Hey guys I am getting ready to do a overhaul on my boat and I am hoping someone can confirm that what I am planning will actually work. I am getting ready to put a SmartCraft network in my 2004 Sea Ray Sundancer 320 w/ 5.0 MPI I/O engines so I can get my engine data on my MFDs. I have a...

Hi guys I just got a new to me 2004 Sundancer 300 It does have the smartcraft gauges as well I am trying to get the engine data to show on my Garmin 742gps I bough this smartcraft gateway from mercruiser but since I have two engines would I need an additional Y connector or not? Also where...

I have seen some really great things done with tying GPSs to the engines. I heard that the NMEA 2000 connection will only connect 2007 and new boats. I have a 99 340 DA - is there an after market product that someone makes that will allow me to connect the engines to the GPS? I know I have 2...