trim

  1. S

    2006 Sea Ray 240 Sundeck - replace throttle trim switch

    Does anyone have experience with replacing the trim switch on the throttle handle of a 240 Sundeck (or similar model)? The trim switch at the helm stopped working in both directions, but the switch at the transom works fine, so I believe the switch itself has failed. I’ve ordered the...
  2. Henry Bonilla

    Teak Steps

    Beautiful Teak Steps installed. SR 340!
  3. Althepal78

    Inboard/outboard outside hydraulic hose

    Hi, I was wondering if I need to take out the whole engine just to fix that hose or could I fix it exactly where it is after I drain the oil of course?
  4. 9

    Sea Ray 175 in the waves. Advice needed, I can not seem to trim down enough. Change Prop?

    Hello All! I have a Sea Ray 175 (18ft bow rider) with Mercruiser 3.0lx with Alpha one gen 2 drive and a 14.25 x 21p 3 blade aluminum prop. I was out on Lake Pontchartrain yesterday and in the chop I found it hard to keep the bow down. In my almost zero experience I have trimmed up slightly in...
  5. Eddie B

    Trim hoses and manifolds

    Hi everyone! So my 2003 240 DA (5.0mpi +BravoIII) was supposed to be launched last week. Weather delayed that an I am glad it did. Checked the boat this weekend and went to exercise the out drive trim… and it looks like one of the hoses from the pump to the manifold blew or the manifold...
  6. hyperzap

    How do i remove interior trim?

    Sorry if this is a silly question, I'm new. There's a section of trim that I would like to install snaps into for mounting some (light) stuff, neatly and out of the way. to install snaps I need to get at the back: any idea how I do that?
  7. eetai levin

    First time owner 2011 sea ray 175 sport general questions

    My first question is in regards to the trim; I took it for the first time to the lake, I lowered the trim but I didn't look at the indicator I wasn't sure how long it will take it to go down (I could have looked and checked but I didn't) but I realize that you can constantly hear the hydraulics...
  8. Nelco

    Trim Tab Advice Needed - 280 Sundancer

    Trying to get my 2005 280 Sundancer ready for the slip.. So close! (Twin 305 MerCruisers) Ran into an issue and need your advice. Starboard Trim-Tab - Seem to be working correctly Port Trim-Tab - When you hit the down button you can hear a relay but nothing happens. Up button has no relay...
  9. S

    Fluid locations

    Hello everyone. New to boats in general and I have a question. I have a 2011 Sea Ray 185 sport with a 4.3L engine. I started getting one beep about once a minute while coming in last week. I believe it is a low fluid warning since my gauges all looked good. Is there a diagram somewhere that...
  10. Todd Fiore

    Trim stuck in up position.

    2007 Sea Ray Sundeck 240 Bravo 3 Mag 350 Hi all, Trim down has been intermittent lately and recently stopped working all together. If I press the trim up switch on the throttle handle, you can hear a click and hear it trying to move up. When I press down on the switch there are no clicks or...
  11. Raymon

    1995 Sea Ray Sundancer motor tilt issue

    I have a 1995 sea ray sundancer with twin I/O 4.3lx mercruisers. So my trim and tilt were working perfectly fine. I re did the heads on the port engine. Got everything together (boat fired up and that problem was solved). Well I was doing function checks and my motors won't tilt all the way up...
  12. Arminius

    Sterndrive-boating basics?

    How's this thing work (compared to a familiar big outboard)? First time starting my first 2003 sterndrive in a tub last week. New impeller, oil and filters. Gauges said it worked fine but it is different and advice will be appreciated. 5.0 L MPI, OM600590, Seawater cooled; Manual, Single Point...
  13. LowellB

    Strange trim issue...

    Recently purchased my 1995 Sundancer 330. Trim was working fine until I tripped the separate "Trailer Trim" switch. Now, when I try to trim the starboard outdrive, the port moves as well. Only when I trim up. Does not happen when i trim the port outdrive. I pulled the trim switches to see if...
  14. R

    1990 180 bowrider. Trim up wont work, but Trailer button does.

    Hi all, new member here. just got the boat about 2 weeks ago. on its maiden voyage, the trim up switch stopped functioning. Trailer button, and trim down work. Took the cover off on the handle and checked connections, all seemed fine and untouched. Checked connections at pump, and all the fuses...
  15. R

    Outdrive Trailer Up Switch problem

    My trim up/down switches function properly for both outdrives. However, when I use the Trailer Up switch, ONLY the port drive raises up, the starboard drive does not move at all. Any ideas on what the problem might be? Thank you for any advice/help.
  16. E

    Seastar/Teleflex CH1751P Install & Tilt wiring on 230

    Hi, I have a 1998 230 bowrider. The Quicksilver Commander 3000 Remote Control went bad and I am replacing it with a Seastar Ch1751P. I'm having difficulty wiring it correctly. The Commander 3000 had a four wire harness (purple, blue, red, green). The CH1751P has two (2) sets of three wire...
  17. A

    Bennett - One switch, either switch, boths tabs go up or down at the same time??

    Hello, I've checked everything, cleaned switch contacts, cut out and spliced pugs, removed the relay, checked both solenoid O rings and springs, and still with just one switch, either switch operated, both tabs go up or down together...? Is there a barrier inside the pump that could leak...
  18. F

    Bravo 3 Trim stopped Working

    Hi. I have a 2007 Sundeck 260 with 8.1L and Bravo 3. The boat ran great all summer. I ran the boat for an hour and pulled the boat out on my trailer 2 weeks ago. I then, unscrewed the drain plug, and let 2-3 gallons of bilge water run out on the boat ramp. I was preparing to drain the...
  19. K

    Bennett "All in One" product request :-)

    Hi Tom, I have just bought a "new to me" 2008 310DA :-) - and I'm going through the list of upgrades I would like. One of them is Auto Tab, the other is NMEA2000 output - and 3rd - I would like a TTI indication as well. (I'm an electronics engineer... so... ) But then I would clutter up my...
  20. T

    1988 Seville Mid Cabin wants to lean right

    Interesting that my boat has done this a couple of times now. Once planed out and running (everything is fine) suddenly the boat wants to lean to the right and pull to the right. Slow down and all is good. Everything runs fine, and no probs to speak of, just freaks my wife out a little. Is this...
Back
Top